Install Top Post Anchors

What happens in this clip

With the handrail loosely assembled, position it on the steps in the desired location. Use a pencil or marker to precisely mark the four anchor points for the top post onto the concrete surface. Don your safety glasses and hearing protection. Using the hammer drill with the appropriate 3/8-inch concrete drill bit, carefully drill the four holes at the marked locations. Ensure the holes are deep enough to accommodate the masonry anchor bolts. Once drilled, insert the gold masonry anchor bolts into the holes. Some may slide in easily, while others might require gentle tapping with a hammer to fully seat them.

Goal: Securely mount the top handrail post to the concrete

What's used

Tools

• 3/8 inch (10mm) concrete drill bit Bosch
• Assembled handrail Mety Metal
• Hammer
• Hammer drill
• Hearing protection
• Masonry anchor bolts (gold)
• Pencil/marker
• Safety glasses

About the full video

This project guides you through the process of installing a pre-fabricated metal handrail on concrete steps. It covers identifying parts, selecting the correct drill bit, assembling the handrail, securing it to the concrete using masonry anchor bolts, and finalizing the installation with covers and tightening all components.

Step 1 of 8: Select Handrail and Hardware

Select a handrail material that is durable and resistant to outdoor elements. Consider the style that best complements your home's exterior. Ensure the mounting hardware, such as brackets and fasteners, is also rated for outdoor use and is appropriate for concrete installation. Check local building codes for any specific requirements regarding handrail height, grip diameter, and spacing.

Open this step in the guide

Other videos for this step

• Install Custom Handrail