powered by

Measure and Evaluate Stair Riser Uniformity

From How to Measure Basement Stairs with Uneven Steps · Step 1 of 6 · Video by Today's Homeowner with Danny Lipford

Showing 0:18–1:16 of the source video. Watch the full video with every moment.

What happens in this clip

Carefully inspect the height of each stair riser, from the top landing down to the basement floor. The video explicitly states that "the height of each step is not consistent it can create a trip hazard." Use a tape measure to check if all risers are within a very tight tolerance (typically 3/8 inch total variation from highest to lowest riser in a flight, but ideally perfectly consistent). Pay particular attention to the first and last steps, as these are most often affected by varying floor thicknesses at the upper and lower levels. If the flooring at the bottom of the stairs is different (e.g., a thick 3/4-inch hardwood floor is installed where a thinner floor once was), this will directly alter the height of the bottom-most riser, potentially making it inconsistent with the rest and creating a tripping hazard.

Goal: Identify any inconsistencies in stair riser heights, particularly affected by flooring transitions.

What's used

Tools

  • Measuring Tape
  • Rigid ruler

About the full video

This project provides guidance on how to assess common issues with existing basement stairways, focusing on building code compliance for consistent riser heights and addressing the 'dark tunnel' aesthetic of enclosed stairs. It then outlines the planning considerations for renovating such a stairway, including evaluating the impact of flooring on riser height and the structural implications of opening up the space to install an open handrail and spindle system, ultimately aiming for a safer and more welcoming basement entrance.

Step 1 of 6: Inspect the Stairs for Visible Unevenness

Before taking any measurements, conduct a thorough visual inspection of the entire staircase. Look for any treads that appear to be sagging or dipping in the middle, any risers that are visibly shorter or taller than others, or if the entire staircase seems to be leaning or out of plumb. Note any areas that appear to be structurally compromised or have significant wear. This initial inspection will help you focus your detailed measurements on the most problematic areas.

Open this step in the guide

Every video in How to Measure Basement Stairs with Uneven Steps

  1. Step 1: Inspect the Stairs for Visible Unevenness

  2. Step 2: Measure the Rise of Each Step

  3. Step 3: Measure the Run of Each Step

  4. Step 4: Check for Plumb and Level of Treads and Risers

  5. Step 5: Measure Overall Staircase Dimensions

  6. Step 6: Document All Measurements

How to Measure Basement Stairs with Uneven Steps

Outline for measuring uneven basement stairs to prepare for leveling or repair. This involves identifying the extent of the unevenness and taking precise measurements of each step's rise and run to plan corrective actions.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Measure and Evaluate Stair Riser Uniformity — How to Measure Basement Stairs with Uneven Steps | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.