Measure Straight Stairs
From How to Measure Basement Stairs with Uneven Steps · Step 3 of 6 · Video by The Home Improvements Channel UK

Showing 2:54–4:47 of the source video. Watch the full video with every moment.
What happens in this clip
To measure straight stairs, measure from the nose (front edge) of one step, down the riser, and across the tread to the nose of the next step. Repeat this for all straight steps. For beginners, it's advised to measure each step individually and sum them up for total length. A common mistake is just measuring along the top of the treads, which will result in insufficient material. The combined measurement for each step is crucial. For carpet installation, always add at least 6 inches to your total length measurement to allow for proper tucking and trimming.
Goal: Accurately measure the straight steps by combining the tread and riser for each step, ensuring enough material for tucking.
What's used
Tools
- Notebook/Paper
- Pencil
- Tape Measure
About the full video
This video provides detailed instructions on how to measure winder stairs (angled or pie-shaped steps) for carpet installation, considering pile direction and allowing for extra material during cuts. It covers measuring top landings, straight stairs, winder steps, and half landings, culminating in creating a custom carpet plan based on these precise measurements.
Step 3 of 6: Measure the Run of Each Step
Using a tape measure, determine the horizontal depth of each step from the edge (nosing) to the vertical face (riser) of the step directly above it. Measure the run at both the left and right sides, and in the center of each step. Record these measurements for every step. Consistent run is also important for stair safety. Note any significant differences in run measurements.
Every video in How to Measure Basement Stairs with Uneven Steps
Step 1: Inspect the Stairs for Visible Unevenness
Step 2: Measure the Rise of Each Step
Step 3: Measure the Run of Each Step
- 0:00–0:03 Measure Individual Stair Components
- 2:54–4:47 Measure Straight Stairs (this video)
- 0:52–2:34 Measuring Rise and Run
Step 4: Check for Plumb and Level of Treads and Risers
- 0:19–0:51 Level and Align Installed Riser
- 2:22–2:42 Diagnose Stair Fit Problems and Causes
- 12:00–14:21 Check Tread Level and Stringer Fit
Step 5: Measure Overall Staircase Dimensions
- 0:04–0:28 Measure Total Rise
- 1:05–3:09 Determine Staircase Dimensions
- 0:04–0:30 Measure Total Rise
Step 6: Document All Measurements
- 0:01–0:28 Measure Total Vertical Rise
- 0:54–1:25 Calculate Final Total Rise
- 0:43–1:29 Measure Total Staircase Height (Method 1)
How to Measure Basement Stairs with Uneven Steps
Outline for measuring uneven basement stairs to prepare for leveling or repair. This involves identifying the extent of the unevenness and taking precise measurements of each step's rise and run to plan corrective actions.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

