powered by

Measure Inconsistent Step Rise Heights

From How to Measure Basement Stairs with Uneven Steps · Step 2 of 6 · Video by Straight Arrow Repair

Showing 0:24–0:39 of the source video. Watch the full video with every moment.

What happens in this clip

The speaker pulls out a metal tape measure to accurately measure the vertical height (rise) of each step. He measures the first step from the ground to the top of the step, noting it is approximately '8, 9 inches' depending on the exact spot. He then measures the second step's rise from the first step to the second, noting it is '6 and three-quarters' or '7' inches. Finally, he measures the rise from the second step to the threshold of the door, indicating it is 'two and a half, three inches'. This demonstrates a dangerous lack of uniformity in step heights, which can easily cause missteps.

Goal: The speaker uses a tape measure to demonstrate and quantify the significant variations in the rise heights between the existing wooden steps, highlighting them as a major safety concern.

What's used

Tools

  • Tape Measure

About the full video

This video details the initial assessment of existing wooden steps leading to a tornado shelter, highlighting significant safety hazards. The speaker identifies deterioration and inconsistent rise heights, emphasizing the increased fall risk for elderly individuals. This assessment serves as a crucial preliminary step before undertaking any repair work, such as using epoxy filler, to ensure the steps meet safety standards.

Step 2 of 6: Measure the Rise of Each Step

Using a tape measure and a level, accurately measure the vertical distance between the top surface of one tread and the top surface of the tread directly above it. Start at the bottom of the stairs and work your way up, measuring the rise at both the left and right sides of each step, as well as in the center. Record these measurements for each step. Consistent rise is crucial for comfortable and safe stair use. Note any significant variations.

Open this step in the guide

Every video in How to Measure Basement Stairs with Uneven Steps

  1. Step 1: Inspect the Stairs for Visible Unevenness

  2. Step 2: Measure the Rise of Each Step

  3. Step 3: Measure the Run of Each Step

  4. Step 4: Check for Plumb and Level of Treads and Risers

  5. Step 5: Measure Overall Staircase Dimensions

  6. Step 6: Document All Measurements

How to Measure Basement Stairs with Uneven Steps

Outline for measuring uneven basement stairs to prepare for leveling or repair. This involves identifying the extent of the unevenness and taking precise measurements of each step's rise and run to plan corrective actions.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Measure Inconsistent Step Rise Heights — How to Measure Basement Stairs with Uneven Steps | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.