Measure Total Rise
From How to Measure Basement Stairs with Uneven Steps · Step 5 of 6 · Video by Frugal Off Grid

Showing 0:04–0:28 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by measuring the total vertical distance from the finished lower surface to the intended finished upper surface where the staircase will end. The video emphasizes measuring from 'finished surface to finished surface.' If the upper flooring is not yet installed (e.g., 2 inches thick), remember to account for its thickness. The example in the video uses a total rise of 85.5 inches.
Goal: Measure the complete vertical height from the lower finished surface to the upper finished surface, accounting for any future flooring thickness.
What's used
Tools
- Measuring Tape
About the full video
This video provides step-by-step instructions on how to accurately lay out and cut simple stair stringers for a deck staircase. It covers calculating the total rise, determining individual step rise and run for comfort and safety, marking the first step using a speed square to create a template, and adjusting the bottom step to account for finished flooring thickness. The process aims to produce identical risers throughout the entire staircase for optimal functionality.
What's said in this clip
stairs the first step is to measure from a finished surface to a finished surface so if you didn't have that flooring up there yet you would just measure from the finished surface to what the finished surface will be in the future those boards are 2 in thick so you would add 2 in to the joist hangers finish surface to finish surface in this case it's 85.5 in
Automatically transcribed from the source video.
Step 5 of 6: Measure Overall Staircase Dimensions
Measure the total vertical distance from the finished floor at the bottom of the stairs to the finished floor at the top of the stairs (total rise). Then, measure the total horizontal distance from the base of the first riser to the point directly beneath the edge of the top landing (total run). These overall measurements provide context for the individual step measurements and can help in planning any significant structural adjustments.
Every video in How to Measure Basement Stairs with Uneven Steps
Step 1: Inspect the Stairs for Visible Unevenness
Step 2: Measure the Rise of Each Step
Step 3: Measure the Run of Each Step
- 0:00–0:03 Measure Individual Stair Components
- 2:54–4:47 Measure Straight Stairs
- 0:52–2:34 Measuring Rise and Run
Step 4: Check for Plumb and Level of Treads and Risers
- 0:19–0:51 Level and Align Installed Riser
- 2:22–2:42 Diagnose Stair Fit Problems and Causes
- 12:00–14:21 Check Tread Level and Stringer Fit
Step 5: Measure Overall Staircase Dimensions
- 0:04–0:28 Measure Total Rise (this video)
- 1:05–3:09 Determine Staircase Dimensions
- 0:04–0:30 Measure Total Rise
Step 6: Document All Measurements
- 0:01–0:28 Measure Total Vertical Rise
- 0:54–1:25 Calculate Final Total Rise
- 0:43–1:29 Measure Total Staircase Height (Method 1)
How to Measure Basement Stairs with Uneven Steps
Outline for measuring uneven basement stairs to prepare for leveling or repair. This involves identifying the extent of the unevenness and taking precise measurements of each step's rise and run to plan corrective actions.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

