powered by

Check Tread Level and Stringer Fit

From How to Measure Basement Stairs with Uneven Steps · Step 4 of 6 · Video by The Tall Carpenter

Showing 12:00–14:21 of the source video. Watch the full video with every moment.

What happens in this clip

Place a spirit level on various treads to ensure they are perfectly horizontal. The presenter notes that some treads might be slightly high or low. Also, check the bottom of the stringer where it meets the floor. Mathematical calculations confirmed a 6.6mm discrepancy, indicating a small amount needs to be trimmed from the bottom stringer for a perfect fit. Use a spirit level to check the plumb of the newel posts, ensuring they are vertical.

Goal: Use a level to check all treads for levelness and verify the fit of the stringer against the floor, making small adjustments as needed.

What's used

Tools

  • Oscillating Multi-tool
  • Spirit Level
  • Tape Measure

About the full video

This video provides a detailed, step-by-step guide on installing a pre-fabricated wooden staircase in a new build or renovation project. The process covers preparing and notching newel posts, assembling the staircase components with glue and dowels, securing the main structure, installing the handrail, and fitting the decorative bullnose at the bottom, highlighting precision measurements and adjustments for a flush and stable fit.

What's said in this clip

see if we need to put this here. uh see uh if we need to trim any off the bottom of here. Obviously, as I said, I'll put my level on there to make sure that they're level. Check this uh once that's level across that tread as well. Check this for right. We can also double check the measurements cuz we know what the uh rise is so we can times it by how many however many treads are. But yeah, even if hopefully uh either that's got to be jacked up a little bit, it may be spot on, but worst case we can jack up a little bit or we can cut a bit off it. So, let's double check that. Right. So, put my level on it there. Let's have a look. So, we can see there. Interesting. Look, that shows it's very slightly low. If I try the next one, shows it's very slightly high. The next one slightly high. So I think slightly high. Look. So I think uh we're very slightly high. So I'll check the mathematical measurements here. But it looks like we we're on the right side here. We might just have to trim 5 mil off the bottom of that. So brilliant. Right. So just done a bit of mathematics. As I said, the rise is 196.8 and we got 12 treads down to this tread here. So uh that times by that is 2361. So, we should be looking for a measurement of 2361 from this tread up to the floor up here. So, let's have a look. As I said, I think we're a bit high. So, I'll pull my tape out. Here we go. What we got? Hold the camera as well. There. Yeah. So, as we thought, look what we got there. Can you see that? 2 3 55. So basically what we talking uh five or six mil we got to come down. So yeah spot [Music] on. Right. That's that bottom cut there. What I've done now is cut a little prop if you can hear me. Cut a little prop under this side here. Um put a level across. It's showing very slightly high there, but I'm not worried cuz there's slight diff a little bit of a discrepancy in this bottom step. More

Automatically transcribed from the source video.

Step 4 of 6: Check for Plumb and Level of Treads and Risers

Place a long level across the width of each tread to check if it is level from side to side and front to back. Then, use a level or a plumb bob to check if the vertical face of each riser is plumb (perfectly vertical). Any significant deviations from level or plumb indicate that the stairs may have settled unevenly or were not constructed correctly.

Open this step in the guide

Every video in How to Measure Basement Stairs with Uneven Steps

  1. Step 1: Inspect the Stairs for Visible Unevenness

  2. Step 2: Measure the Rise of Each Step

  3. Step 3: Measure the Run of Each Step

  4. Step 4: Check for Plumb and Level of Treads and Risers

  5. Step 5: Measure Overall Staircase Dimensions

  6. Step 6: Document All Measurements

How to Measure Basement Stairs with Uneven Steps

Outline for measuring uneven basement stairs to prepare for leveling or repair. This involves identifying the extent of the unevenness and taking precise measurements of each step's rise and run to plan corrective actions.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Check Tread Level and Stringer Fit — How to Measure Basement Stairs with Uneven Steps | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.