Measure Individual Stair Components
From How to Measure Basement Stairs with Uneven Steps · Step 3 of 6 · Video by The Home Improvements Channel UK

Showing 0:00–0:03 of the source video. Watch the full video with every moment.
What happens in this clip
To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.
Goal: Begin by accurately measuring the width, tread depth, and riser height of a typical stair in your staircase. These foundational measurements are critical for calculating the total material needed for both underlayment and carpet.
What's used
Tools
- Notepad and Pen
- Pencil/Marker
- Tape Measure
About the full video
This detailed guide outlines the essential steps for accurately measuring stairs to determine the precise quantity of carpet and underlayment required for installation. It covers individual stair component measurements, the application of specific formulas to calculate material lengths per step, and the subsequent marking and cutting of underlayment and carpet strips. The process aims to minimize material waste and ensure a professional, well-fitted stair carpet installation.
What's said in this clip
[Music] i heard jesus did cocaine on a night out eyes wide open [Music]
Automatically transcribed from the source video.
Step 3 of 6: Measure the Run of Each Step
Using a tape measure, determine the horizontal depth of each step from the edge (nosing) to the vertical face (riser) of the step directly above it. Measure the run at both the left and right sides, and in the center of each step. Record these measurements for every step. Consistent run is also important for stair safety. Note any significant differences in run measurements.
Every video in How to Measure Basement Stairs with Uneven Steps
Step 1: Inspect the Stairs for Visible Unevenness
Step 2: Measure the Rise of Each Step
Step 3: Measure the Run of Each Step
- 0:00–0:03 Measure Individual Stair Components (this video)
- 2:54–4:47 Measure Straight Stairs
- 0:52–2:34 Measuring Rise and Run
Step 4: Check for Plumb and Level of Treads and Risers
- 0:19–0:51 Level and Align Installed Riser
- 2:22–2:42 Diagnose Stair Fit Problems and Causes
- 12:00–14:21 Check Tread Level and Stringer Fit
Step 5: Measure Overall Staircase Dimensions
- 0:04–0:28 Measure Total Rise
- 1:05–3:09 Determine Staircase Dimensions
- 0:04–0:30 Measure Total Rise
Step 6: Document All Measurements
- 0:01–0:28 Measure Total Vertical Rise
- 0:54–1:25 Calculate Final Total Rise
- 0:43–1:29 Measure Total Staircase Height (Method 1)
How to Measure Basement Stairs with Uneven Steps
Outline for measuring uneven basement stairs to prepare for leveling or repair. This involves identifying the extent of the unevenness and taking precise measurements of each step's rise and run to plan corrective actions.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

