powered by

Measuring Rise and Run

From How to Measure Basement Stairs with Uneven Steps · Step 3 of 6 · Video by Everyday Home Repairs

Showing 0:52–2:34 of the source video. Watch the full video with every moment.

What happens in this clip

Two critical dimensions for stair construction are 'rise' and 'run'. The rise is the vertical distance from the landing pad surface to the top of the deck boards. To measure this, place a level tool on the deck's edge, extending it out horizontally, and use a measuring tape to measure the vertical distance from the underside of the level to the landing surface. The run refers to the horizontal depth of each stair tread. For this project, two standard 5.5-inch deck boards are used for each tread, with a 1-inch overhang, resulting in a 10-inch run per step. For three steps, this equals a total run of 30 inches. Building codes in the area specify that no step can exceed 7 3/4 inches in rise and that all steps must be within 3/8 inches of each other. Based on a total rise of 28 1/4 inches for three steps, each step's individual rise is calculated to be 7 1/16 inches.

Goal: Accurately determine the total rise and individual step run and rise measurements for stair stringers.

What's used

Tools

  • Level Tool
  • Straight edge with a small level
  • Measuring Tape

Materials

  • Deck Boards

About the full video

This project provides detailed, step-by-step instructions for constructing a set of wooden stairs for a deck. It covers crucial initial measurements like rise and run, preparing the deck's rim joists for stringer attachment, marking and cutting stair stringers from 2x12 pressure-treated lumber using specific tools, and finally, assembling and securing the stairs to both the deck and a landing pad.

Step 3 of 6: Measure the Run of Each Step

Using a tape measure, determine the horizontal depth of each step from the edge (nosing) to the vertical face (riser) of the step directly above it. Measure the run at both the left and right sides, and in the center of each step. Record these measurements for every step. Consistent run is also important for stair safety. Note any significant differences in run measurements.

Open this step in the guide

Every video in How to Measure Basement Stairs with Uneven Steps

  1. Step 1: Inspect the Stairs for Visible Unevenness

  2. Step 2: Measure the Rise of Each Step

  3. Step 3: Measure the Run of Each Step

  4. Step 4: Check for Plumb and Level of Treads and Risers

  5. Step 5: Measure Overall Staircase Dimensions

  6. Step 6: Document All Measurements

How to Measure Basement Stairs with Uneven Steps

Outline for measuring uneven basement stairs to prepare for leveling or repair. This involves identifying the extent of the unevenness and taking precise measurements of each step's rise and run to plan corrective actions.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Measuring Rise and Run — How to Measure Basement Stairs with Uneven Steps | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.