Visually Inspect for Staircase Wear and Damage
From How to Measure Basement Stairs with Uneven Steps · Step 1 of 6 · Video by stairbuilding

Showing 1:02–1:35 of the source video. Watch the full video with every moment.
What happens in this clip
After understanding the measurement technique, the video shifts to visually examining the staircase for any obvious signs of wear and tear, which are more common in older structures. It points out that the center sections of the treads are most susceptible to abuse from repeated foot traffic over time. Look for chipped or missing nosing (the front edge of the tread), split sections of the wood, or noticeable depressions and unevenness on the tread surfaces. These visual cues often indicate areas where code violations due to excessive variation are most likely to occur.
Goal: Conduct a visual assessment of the staircase to identify obvious signs of wear, such as missing nosing, split sections, or depressions in the treads, which are common in high-traffic areas.
About the full video
This video illustrates how to perform a visual and measurement-based inspection of older staircases to identify wear and tear that could result in building code violations related to riser height and tread depth. It emphasizes the importance of checking for consistency between steps to ensure safety and compliance, particularly for homeowners undertaking remodeling projects. While the requested context was Electrical Code Compliance, this video specifically addresses structural building codes for stairways.
Step 1 of 6: Inspect the Stairs for Visible Unevenness
Before taking any measurements, conduct a thorough visual inspection of the entire staircase. Look for any treads that appear to be sagging or dipping in the middle, any risers that are visibly shorter or taller than others, or if the entire staircase seems to be leaning or out of plumb. Note any areas that appear to be structurally compromised or have significant wear. This initial inspection will help you focus your detailed measurements on the most problematic areas.
Every video in How to Measure Basement Stairs with Uneven Steps
Step 1: Inspect the Stairs for Visible Unevenness
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage (this video)
- 0:18–1:16 Measure and Evaluate Stair Riser Uniformity
- 0:00–0:59 Assess Existing Unsafe Staircase
Step 2: Measure the Rise of Each Step
Step 3: Measure the Run of Each Step
- 0:00–0:03 Measure Individual Stair Components
- 2:54–4:47 Measure Straight Stairs
- 0:52–2:34 Measuring Rise and Run
Step 4: Check for Plumb and Level of Treads and Risers
- 0:19–0:51 Level and Align Installed Riser
- 2:22–2:42 Diagnose Stair Fit Problems and Causes
- 12:00–14:21 Check Tread Level and Stringer Fit
Step 5: Measure Overall Staircase Dimensions
- 0:04–0:28 Measure Total Rise
- 1:05–3:09 Determine Staircase Dimensions
- 0:04–0:30 Measure Total Rise
Step 6: Document All Measurements
- 0:01–0:28 Measure Total Vertical Rise
- 0:54–1:25 Calculate Final Total Rise
- 0:43–1:29 Measure Total Staircase Height (Method 1)
How to Measure Basement Stairs with Uneven Steps
Outline for measuring uneven basement stairs to prepare for leveling or repair. This involves identifying the extent of the unevenness and taking precise measurements of each step's rise and run to plan corrective actions.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

