Dealing With Basement Stairs
Video by Today's Homeowner with Danny Lipford · 1 moment used in Oak Valley Designs's DIY guides · 1:47 long

Moments in this video
- 0:18–1:16 Measure and Evaluate Stair Riser Uniformity
From How to Measure Basement Stairs with Uneven Steps, Step 1: Inspect the Stairs for Visible Unevenness
Carefully inspect the height of each stair riser, from the top landing down to the basement floor. The video explicitly states that "the height of each step is not consistent it can create a trip hazard." Use a tape measure to check if all risers are within a very tight tolerance (typically 3/8 inch total variation from highest to lowest riser in a flight, but ideally perfectly consistent). Pay particular attention to the first and last steps, as these are most often affected by varying floor thicknesses at the upper and lower levels. If the flooring at the bottom of the stairs is different (e.g., a thick 3/4-inch hardwood floor is installed where a thinner floor once was), this will directly alter the height of the bottom-most riser, potentially making it inconsistent with the rest and creating a tripping hazard.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

