Measure Riser Height and Tread Depth Consistency
From How to Measure Basement Stairs with Uneven Steps · Step 2 of 6 · Video by stairbuilding

Showing 0:31–1:01 of the source video. Watch the full video with every moment.
What happens in this clip
To perform a precise measurement, take a framing square and position it firmly against the riser and tread of a step. Place the short arm of the square on the tread and the long arm vertically against the riser above it. Note the measurement at the top of the riser. Then, position the long arm of the square along the tread, extending towards the front edge (nosing) of the step, and the short arm vertically against the riser of the step below. Note the measurement for the tread depth. Repeat this process for every step on the staircase. The purpose is to compare the measurements for each riser and tread, ensuring they are consistent throughout the staircase. The video demonstrates this technique on a theoretically perfect staircase to show expected uniformity.
Goal: Utilize a framing square to accurately measure the riser height and tread depth at multiple points on each step, checking for consistency and any variations.
What's used
Tools
- Framing Square
About the full video
This video illustrates how to perform a visual and measurement-based inspection of older staircases to identify wear and tear that could result in building code violations related to riser height and tread depth. It emphasizes the importance of checking for consistency between steps to ensure safety and compliance, particularly for homeowners undertaking remodeling projects. While the requested context was Electrical Code Compliance, this video specifically addresses structural building codes for stairways.
Step 2 of 6: Measure the Rise of Each Step
Using a tape measure and a level, accurately measure the vertical distance between the top surface of one tread and the top surface of the tread directly above it. Start at the bottom of the stairs and work your way up, measuring the rise at both the left and right sides of each step, as well as in the center. Record these measurements for each step. Consistent rise is crucial for comfortable and safe stair use. Note any significant variations.
Every video in How to Measure Basement Stairs with Uneven Steps
Step 1: Inspect the Stairs for Visible Unevenness
Step 2: Measure the Rise of Each Step
- 0:24–0:39 Measure Inconsistent Step Rise Heights
- 1:24–1:56 Repeat for All Risers and Measure Variation
- 0:31–1:01 Measure Riser Height and Tread Depth Consistency (this video)
Step 3: Measure the Run of Each Step
- 0:00–0:03 Measure Individual Stair Components
- 2:54–4:47 Measure Straight Stairs
- 0:52–2:34 Measuring Rise and Run
Step 4: Check for Plumb and Level of Treads and Risers
- 0:19–0:51 Level and Align Installed Riser
- 2:22–2:42 Diagnose Stair Fit Problems and Causes
- 12:00–14:21 Check Tread Level and Stringer Fit
Step 5: Measure Overall Staircase Dimensions
- 0:04–0:28 Measure Total Rise
- 1:05–3:09 Determine Staircase Dimensions
- 0:04–0:30 Measure Total Rise
Step 6: Document All Measurements
- 0:01–0:28 Measure Total Vertical Rise
- 0:54–1:25 Calculate Final Total Rise
- 0:43–1:29 Measure Total Staircase Height (Method 1)
How to Measure Basement Stairs with Uneven Steps
Outline for measuring uneven basement stairs to prepare for leveling or repair. This involves identifying the extent of the unevenness and taking precise measurements of each step's rise and run to plan corrective actions.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

