Assess Existing Unsafe Staircase
From How to Measure Basement Stairs with Uneven Steps · Step 1 of 6 · Video by Jenna Phipps

Showing 0:00–0:59 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by thoroughly inspecting the existing staircase. Observe the multiple layers of plywood placed over rotten treads and holes, indicating severe structural compromise. Note any slanted or uneven steps, which pose a significant safety risk. Pay close attention to the stringers, as they are discovered to be inadequately cut (a 2x10 reduced to a 2x4 in places) and improperly supported, failing to meet building codes. This initial assessment is crucial for understanding the scope of the demolition and reconstruction required.
Goal: The first step involves identifying the structural deficiencies of the old staircase, noting rotten wood, hazardous holes, uneven steps, and non-code-compliant construction practices.
About the full video
This video documents the process of demolishing an old, non-code-compliant staircase and then constructing a new, safe, and sturdy staircase. The project involves removing existing rotten wooden steps, breaking up concrete embedded in the rock foundation, leveling an uneven landing, framing a new shear wall, and finally calculating, cutting, and installing the stringers and treads for the new staircase.
What's said in this clip
it's it's our last demo and honestly it's a little complicated I think that's why we've been avoiding it yeah it's a lot of angles and things this is the OG staircase and ever since we've gotten it since day one we have been piling plywood on top of our staircase here because there's so many holes like look at that you just go right through and one layer rotted through so then we put another layer on and then it broke and then we put another layer on and then now we have this board here and if you come downstairs the stairs are slightly slanted yeah so we're going to have to rip all of this out and build brand new stairs which is kind of complicated they also aren't to code do you want to show them yeah so as you can see here this is a 2x10 and as you can see here they decided to take 80% of the 2x10 and
Automatically transcribed from the source video.
Step 1 of 6: Inspect the Stairs for Visible Unevenness
Before taking any measurements, conduct a thorough visual inspection of the entire staircase. Look for any treads that appear to be sagging or dipping in the middle, any risers that are visibly shorter or taller than others, or if the entire staircase seems to be leaning or out of plumb. Note any areas that appear to be structurally compromised or have significant wear. This initial inspection will help you focus your detailed measurements on the most problematic areas.
Every video in How to Measure Basement Stairs with Uneven Steps
Step 1: Inspect the Stairs for Visible Unevenness
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
- 0:18–1:16 Measure and Evaluate Stair Riser Uniformity
- 0:00–0:59 Assess Existing Unsafe Staircase (this video)
Step 2: Measure the Rise of Each Step
Step 3: Measure the Run of Each Step
- 0:00–0:03 Measure Individual Stair Components
- 2:54–4:47 Measure Straight Stairs
- 0:52–2:34 Measuring Rise and Run
Step 4: Check for Plumb and Level of Treads and Risers
- 0:19–0:51 Level and Align Installed Riser
- 2:22–2:42 Diagnose Stair Fit Problems and Causes
- 12:00–14:21 Check Tread Level and Stringer Fit
Step 5: Measure Overall Staircase Dimensions
- 0:04–0:28 Measure Total Rise
- 1:05–3:09 Determine Staircase Dimensions
- 0:04–0:30 Measure Total Rise
Step 6: Document All Measurements
- 0:01–0:28 Measure Total Vertical Rise
- 0:54–1:25 Calculate Final Total Rise
- 0:43–1:29 Measure Total Staircase Height (Method 1)
Questions about How to Measure Basement Stairs with Uneven Steps
Why is it so important to measure each step individually and precisely?
Uneven stairs can be a significant tripping hazard, and precise measurements are crucial for effective leveling or repair. Small discrepancies in rise or run can impact safety and comfort. This detailed data will guide accurate material cuts and ensure a consistent, safe staircase.
What are the most critical tools for this project, and why?
A reliable tape measure is essential for accurate lengths. A quality level helps verify plumb and level, identifying unevenness in treads and risers. A plumb bob is key for consistent vertical rise measurements. A bright flashlight is also vital for illuminating dark basement areas to ensure visibility and safety.
What should I do if my basement stairs are very dark, or if I suspect structural issues?
Always prioritize safety. Use a bright flashlight to ensure clear visibility and prevent trips. If you notice signs of significant structural damage like large cracks, rot, or shifting, consult a structural engineer or a licensed contractor before proceeding with any DIY repairs beyond just measuring.
How can I ensure my measurements are accurate and consistent?
Use the same measuring points for each step (e.g., always measure from the nosing to the nosing for run, and tread surface to tread surface for rise). Double-check each measurement and immediately record it on your whiteboard or notebook. Consider having a helper for consistency.
After measuring, what's the next step for fixing uneven stairs?
Once you have precise measurements, you can plan your repair strategy. This might involve shimming uneven treads, rebuilding risers, or using a self-leveling compound, depending on the cause and severity of the unevenness. You'll use these measurements to calculate material needs for your chosen repair method.
Can I use a smartphone app for leveling instead of a physical level?
While smartphone level apps can provide a general idea, they are typically not as accurate or reliable as a dedicated physical level for critical home improvement projects. For the precise measurements needed for stair repair, it is best to use a good quality physical level to ensure accuracy.
How do I record all these measurements effectively so I don't get confused?
Create a simple diagram of your stairs on the chalkboard/whiteboard. Label each step numerically and clearly record the rise, run, and any level or plumb deviations next to the corresponding step number. This visual aid will prevent confusion and make planning easier.
How to Measure Basement Stairs with Uneven Steps
Outline for measuring uneven basement stairs to prepare for leveling or repair. This involves identifying the extent of the unevenness and taking precise measurements of each step's rise and run to plan corrective actions.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

