Install Shelf Units and Supports

What happens in this clip

With the shelf units ready, lift and position the first unit against the wall. Ensure it is level using a spirit level. Once positioned correctly, use a cordless drill and long wood screws to attach the shelf unit securely to the wall studs. The video shows attaching the first unit to the bottom section of the wall. Repeat this for subsequent shelf units, stacking them vertically and attaching them to the wall studs and to each other using wood screws to create a multi-tiered shelving system. Add additional vertical 2x4 supports where necessary, screwing them into the wall studs and the shelf units to enhance stability and create separate sections for the shelves. Use clamps to hold pieces in place before drilling and screwing.

Goal: Securely attach the shelf units and additional supports to the basement wall.

What's used

Tools

• Additional 2x4 Lumber
• Assembled Shelf Units
• Clamps
• Cordless Drill Ryobi
• Spirit Level
• Wood Screws (long) GRK

About the full video

This project provides detailed instructions for building sturdy, floor-to-ceiling storage shelves in a basement. It covers measuring the space, cutting lumber and OSB sheets, assembling the wooden frames, attaching the shelf surfaces, and finally installing and organizing items on the finished shelves to maximize storage space.

Step 10 of 10: Install the Shelving Unit

Position the shelving unit into the designated under-stair area. If the unit is built to fit snugly, you may need to angle it slightly to get it into place. Once positioned, secure the unit to the wall studs or floor using L-brackets or screws, ensuring it is stable and level.

Open this step in the guide

Other videos for this step

• Install & Secure Bookcase in Alcove
• Install Modular Shelving Frames