Fold and Staple Carpet Over Next Nose
From How to Install Carpet Treads on Stairs with a Deep Nosing Overhang · Step 6 of 7 · Video by Direct Carpet

Showing 12:05–14:25 of the source video. Watch the full video with every moment.
What happens in this clip
Once the carpet is stretched and secured on the tread, carefully fold the carpet down over the stair nose, pushing it firmly into the curve. Using the electric gun stapler, insert staples at a 45-degree angle along the underside of the stair nose. Ensure staples are placed every inch and are hidden within the carpet pile. This technique is repeated for every stair as you work your way up the staircase. Follow with tucking the carpet into the crease with the carpet tucker and hammer.
Goal: Secure the carpet runner over subsequent stair noses.
What's used
Tools
- Carpet Tucker (Stair Tool)
- Electric Gun Stapler
- Hammer
Materials
- Staples for Carpet Stapler
About the full video
This video provides a step-by-step guide on how to securely install a carpet runner on stairs using tack strips, emphasizing proper underpad preparation, centering, stapling techniques, and finishing touches to ensure a neat, safe, and professional-looking installation.
What's said in this clip
so i got my knee i'm pushing in now one two and three okay and that holds that side in nice and tight now look i haven't taken any pressure off my knee okay i've still got some pressure on there what we're going to do is we're going to keep pressure on there got pressure i know that it's straight because i checked it one two three and we put rub those stable marks out a little bit take that kicker off because now we're pretty tight right and that's it okay that is it you're going to do that on the all the way up now the most important or one of them it's all important but this step i really want you to take serious because this is going to make or break the look of the stair is the crease between here and here okay what we want to do is we want to take our stair tool and we want to push down and we want to find that groove the groove of the stair the 90. we're going to push the corner the edge of this in back and forth whatever's either you can do it one way you can do it the other way until that line is square like i haven't even popped a staple in that line yet look at how nice and straight that is okay that's gonna be a money shot there once you've got that in take your stable gun maybe every three inches push on the 45 into that groove i'm out of staples that's good that you guys are going to see that see i ran out go back and i continue and now the final step for that stair is take your carpet tucker and your hammer and now i want you to bang that in all the way along and that look at that groove i mean it's
Automatically transcribed from the source video.
Step 6 of 7: Secure Nosing Overhang
For carpets with a distinct nosing overhang, ensure the carpet is pressed firmly down over the front edge of the stair. The adhesive should hold it in place. If the carpet tends to lift, you may need to apply a bit more adhesive specifically to the underside of the nosing overhang before pressing the carpet down. Some systems might also use a small tack strip or staple in inconspicuous areas if the carpet type and adhesive allow, but this is often not necessary with good adhesive.
Every video in How to Install Carpet Treads on Stairs with a Deep Nosing Overhang
Step 1: Measure Existing Tread Depth and Nosing
- 0:57–1:16 Measure Treads and Mark Laminate
- 0:46–1:05 Measure and Cut Underlayment
- 0:12–0:57 Measure and Cut Carpet Tread
Step 2: Cut Carpet Treads to Size
- 7:20–9:07 Measure and Cut Carpet
- 0:12–0:57 Measure and Cut Carpet Tread
- 2:09–3:19 Measure and Cut Carpet Pieces
Step 3: Dry Fit and Trim Carpet Treads
- 2:13–2:35 Test Fit and Adjust Treads
- 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
- 0:57–2:36 Pre-form and Secure Carpet Underneath Tread
Step 4: Apply Adhesive to Treads
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:59–2:07 Install First Stair Tread
- 0:11–0:43 Install Remaining Carpet Stair Treads
Step 6: Secure Nosing Overhang
- 0:57–2:36 Pre-form and Secure Carpet Underneath Tread
- 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
- 12:05–14:25 Fold and Staple Carpet Over Next Nose (this video)
Step 7: Allow Adhesive to Cure
- 3:06–3:19 Project Completion
- 3:44–4:26 Final Curing and Caulking
- 0:31–0:38 Inspect and Finish Installation
Questions about How to Install Carpet Treads on Stairs with a Deep Nosing Overhang
How can I ensure clean, straight cuts when trimming the carpet treads to size?
For precise cuts, always use a sharp carpet knife with a fresh blade and a sturdy cutting mat. For edges that require more control or if you're working with thicker carpet, heavy-duty carpet shears can provide a cleaner, more controlled finish. Remember to measure twice and cut once to minimize waste.
What safety precautions should I take when installing carpet treads, especially with adhesives?
Always ensure good ventilation when working with carpet adhesives, as they can emit fumes; open windows and doors. Wear appropriate safety gear like gloves to protect your hands from adhesive and eye protection when cutting. Exercise extreme caution when using sharp tools like carpet knives on stairs to prevent slips and cuts.
My stairs have a deep nosing overhang; how do I ensure the carpet tread adheres properly and doesn't lift?
For deep nosings, ensure the carpet tread material is flexible enough to contour around the edge. Apply a quality carpet adhesive evenly across the tread and use a J-roller to firmly press the carpet into place, especially around the nosing. For added security under the very tip of the overhang, a small bead of construction adhesive can provide extra grip and prevent future lifting.
How difficult is it to get the carpet treads perfectly aligned and secure, especially for a beginner?
While considered a beginner project, careful measuring and thorough dry-fitting are crucial for proper alignment and a professional finish. The most time-consuming part is often making small, precise adjustments during the dry-fit stage to ensure each tread sits perfectly. Taking your time here will make the final adhesive application much smoother.
Can I use double-sided carpet tape instead of liquid adhesive for an easier installation?
While double-sided carpet tape offers a quicker installation, it may not provide the long-term durability and security needed for stair treads, especially on high-traffic stairs or those with deep nosings. For a truly secure, permanent installation that prevents shifting, bunching, and lifting over time, a dedicated carpet adhesive is highly recommended.
What's the difference between using pre-made stair tread covers and cutting my own carpet for treads?
Pre-made stair tread covers offer convenience, often come with finished edges, and typically simplify the installation process. Cutting your own treads from broadloom carpet allows for greater customization in size and material, and can be more cost-effective if you have remnant carpet. However, it requires more precise cutting and potentially edge finishing for a neat look.
How to Install Carpet Treads on Stairs with a Deep Nosing Overhang
This project outlines the steps for installing carpet treads on stairs that have a deep nosing overhang. It covers measuring, cutting, fitting, and securing the treads to ensure a safe and aesthetically pleasing result.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

