powered by

Install Carpet Treads

From How to Install Carpet Treads on Stairs with a Deep Nosing Overhang · Step 5 of 7 · Video by Oak Valley Designs

Showing 0:04–0:06 of the source video. Watch the full video with every moment.

What happens in this clip

Starting from the bottom stair, carefully align the first carpet tread according to your predetermined placement (e.g., centered, with a consistent gap from the sides and front edge). Press down firmly, working from the center outwards, to ensure good contact between the adhesive and the stair surface. Apply pressure evenly across the entire surface of the tread. Repeat this process for each subsequent stair, moving upwards. Take your time to ensure each tread is straight and securely adhered. For added security, you can use a small roller or your hands to press down on the entire surface of each tread after placement. The video shows the Golden Retriever comfortably using the stairs, indicating the treads are securely installed.

Goal: Securely attach all carpet treads to the stairs.

What's used

Tools

  • Carpet Stair Treads (prepared)
  • Small Roller
  • even pressure to secure treads.

About the full video

This DIY project provides a comprehensive guide to installing carpet treads on existing stairs. The goal is to enhance safety and comfort, particularly for pets like dogs, by providing increased traction and cushioning. The process involves preparing the stairs, selecting appropriate treads, and securely attaching them, resulting in a more pet-friendly and aesthetically pleasing staircase.

Step 5 of 7: Install Carpet Treads

With the adhesive applied, carefully align the carpet tread with the stair tread. Press down firmly, starting from the back and working towards the nosing, to ensure full contact and adhesion. Apply even pressure across the entire surface, especially along the edges and over the nosing, to eliminate any air bubbles and create a strong bond. Use a roller or your hands to press firmly.

Open this step in the guide

Every video in How to Install Carpet Treads on Stairs with a Deep Nosing Overhang

  1. Step 1: Measure Existing Tread Depth and Nosing

  2. Step 2: Cut Carpet Treads to Size

  3. Step 3: Dry Fit and Trim Carpet Treads

  4. Step 4: Apply Adhesive to Treads

  5. Step 5: Install Carpet Treads

  6. Step 6: Secure Nosing Overhang

  7. Step 7: Allow Adhesive to Cure

How to Install Carpet Treads on Stairs with a Deep Nosing Overhang

This project outlines the steps for installing carpet treads on stairs that have a deep nosing overhang. It covers measuring, cutting, fitting, and securing the treads to ensure a safe and aesthetically pleasing result.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install Carpet Treads — How to Install Carpet Treads on Stairs with a Deep Nosing Overhang | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.