powered by

Stair Runners for Wooden Steps (Guided Tutorial)

Video by Direct Carpet · 1 moment used in Oak Valley Designs's DIY guides · 27:48 long

Moments in this video

  1. 12:05–14:25 Fold and Staple Carpet Over Next Nose From How to Install Carpet Treads on Stairs with a Deep Nosing Overhang, Step 6: Secure Nosing Overhang

    Once the carpet is stretched and secured on the tread, carefully fold the carpet down over the stair nose, pushing it firmly into the curve. Using the electric gun stapler, insert staples at a 45-degree angle along the underside of the stair nose. Ensure staples are placed every inch and are hidden within the carpet pile. This technique is repeated for every stair as you work your way up the staircase. Follow with tucking the carpet into the crease with the carpet tucker and hammer.

The guide that use this video

Transcript

0:02 hey i'm keishan with directcarpet.com uh today we're doing uh a stair runner explainer video for jeannie batista one of our newest clients and she would like to uh she would like a little uh how-to uh so uh sit back relax and enjoy and don't forget to subscribe all right for today's stair runner installation you will need some tools let's go through the tools you're going to be using most of these tools you can rent at your local big box store or rental agency you will need a carpet stapler you will need a carpet tucker you will need a tape measure you will need a very good knife with sharp blades you will need a hammer you will need a pad stapler with pad staples you will need with your electric gun you will need your electric gun staples you will need a great pair of scissors and you will need a kicker so

0:49 let's get on with the job all right first things first is you're going to have to prepare your underpad all right you're going to have to cut your underpad to size we're using a 28 inch runner today when you do a stair runner you're going to cut the under pad 2 inches less than your stair runner if your stair runner is 28 inches you'll be cutting your underpad to 26 inches so let's do that now please use a straight edge on that i'm just doing it quick for uh

1:35 installation purposes and video time now how we're going to install that on the stairs we're going to take our pad stapler and our tape measure and we are going to measure first we're going to center that to our stair so if your stairs are boxed on the inside measure from the inside if they have a rail you can measure from that if not you can measure from the outside of your stair which you know what we will center that to the edge of our stairs so that is eight and a half there

2:21 seven and a half there eight there let's pull that back to eight even eight even on that side okay so you got that eight inches on this side eight inches on that side all right now we're going to staple that in place now i want to do the front first now i want non-stop staples along the front that's to stop the pad from curling up now if you don't have a pad stapler you can use your electric gun stapler i'd rather you use the pad stapler make sure she's got a full clip in there now

3:13 every half inch right at the edge all the way along the front all right now that's to save you renting the pad stapler i'd like you to use the pad stapler but you can use this as well let's show you how to cut the back now now with the back i'd like you to take your tape measure now you can pre-cut these i'd like you to take your tape measure and at one inch i would like you to follow that all the way along so you have a nice straight one inch gap all the way along the back and that's where you're going to staple now like i said you could measure from the riser to the edge which is 10 and a half minus the inch make this piece of underpad

3:59 nine inches right that's what i have there what we say ten and a quarter make this nine and a quarter we're doing a 28 inch runner so nine and a quarter by 26 wide then you're fine all right let's uh show you one more time on this stair here now we know that we were eight and a quarter let's do eight and then eight all right now we'll use the electric gun measure an inch back or if you can pre-cut at nine and a quarter this is just how i do it

4:47 all right so now your stairs are set up for your installation now we're just going to install these two stairs and we're going to pretend that that top riser there is your top riser and we're going to pretend that the bottom riser is your bottom riser so what i'm going to do is i'm going to show you how to install these two stairs which are exactly like installing any 5 6 7 10 stairs all right now we've got our runner here this is the same runner that jeannie is putting in for thanksgiving this is river rock this is we make this here we ship this out from here you guys can get this if you want the same color it's fabulous now on genie's carpet uh i

5:34 have marked on the bottom start here this pile flows down this edge is sewn this is where i want you to start jeannie i want you to line this up now if you've already lined up your under pad under here then this is going to be an inch over on the right side and it'll be an inch over on the left side okay so we're going to line this up let's do that now okay now remember we were eight eight and a quarter on the wood so we're going to be around seven on each side

6:23 we want to fold this over now these bottoms are sewn for a reason and they were straight edged so that hopefully your stairs are straight and now we want to get that down nice and low let's get you in here have a real let's get you in here have a real good look okay you guys can all see right there that we're lined up all the way along and right there now this is the most important part where we're starting okay so here we go we've got our carpet lined up we're going to double check again on both sides then we're going to make sure that we're lined up on this bottom this 90. this is

7:10 the most important part to start doesn't matter if you start on the left side doesn't matter if you start on the right side make sure that you set this up properly get your electric stable gun make sure it's plugged in make sure you're full of stables and you're ready to go double check check and check again if you want to put masking tape all the way down and all the way up your stairs to keep you on track please do so i use a tape measure now here we are six and three quarters at the bottom and then we are seven and a quarter there so we are just going to adjust we're going gonna check it again if you have tape there you already know where you are here we go we're at seven we're gonna wiggle our end of our the point

7:55 of our stable gun in there and we're going to fire that is held in place now and what we're going to do follow that all the way down and i like to go in those little lines or those little creases anywhere to hide the staples make sure this is nice and smooth nice and flat all the way on your floor and you wiggle it to get it past the pile so it doesn't pinch it down right if your staple goes in it'll pinch the pile down and you will see that little mark okay that indentation now the bottom is secured now should be straight and we're going to check our straightness all the way up if we were seven inches on this side from here to here then we want to be seven inches on that side all the way up

8:42 you always stick to one side now what we're going to do is we've got to put staples under the nose i want to staple every inch but i want you to preform this like this with your hands get in there and really work that down that is going to make those staples go into this a little bit easier than pulling out because look at that it wants to pull out okay it's natural course wants to push out and we got to go and this 90 here okay some people have might have quarter round under here and then you go into the quarter round but we're going to go under here on an angle and we're going to go on a 45 like this okay i'm going to start for the right because that's just how i roll now i've pre-formed that see i've got my thumb in

9:27 there i've got my hand over it like this i'm going to push in this carpet's pretty soft so it should be pretty easy i'm going to push up i'm going to put two stables in there just because i want to make sure that holds now just like we did at the bottom here we're holding at the top we measure we know we're straight let's go all the way along every inch on the angle all the way down don't be shy use lots of stables if you're straight you won't have to pull them out i want you to feel underneath there run your hand underneath and make sure that there are no staples popping out then you know you'll have put that in correct look at that that's it that's easy that's the first

10:14 part now let's move up to the next part okay i've got you a a little different view up here high above now this is important now whether you put tape all along the sides you're going to know that you're straight like i said i use a tape measure and i know that i was around 7 there that means i need to be around 7 here which i am now at the front here now stairs are sometimes not all the same this is seven and this is seven so i'm good on both sides okay or like i said you have this the strips of tape now this is where you're gonna get your kicker now the reason why i use a kicker is you

11:00 can do this by hand by pushing this in but it will not stay necessarily tight the method that i teach is we're going to push in with the kicker and we're going to staple on the sides okay we're going to do that on both sides we're going to take the pressure on the middle i'll put this on my hip like this and just push you see how i'm just pushing a little bit okay now it might take a little time to get used to so i might stand up i'll show you another another view like that see how i stood up i'm just pushing him with my knee look at that just bend and push bend and push it reminds me of a movie okay so we've got that

11:47 now you can see that i've got my pressure on here now what i want to do over here is i just want to double check my measurement and i'm seven to the binding which is good and that's where i wanna be what we're gonna do is we're gonna lock it in on that side so i got my knee i'm pushing in now one two and three okay and that holds that side in nice and tight now look i haven't taken any pressure off my knee okay i've still got some pressure on there what we're going to do is we're going to keep pressure on there got pressure i know that it's straight because i checked it one two three and we put rub those stable marks

12:33 out a little bit take that kicker off because now we're pretty tight right and that's it okay that is it you're going to do that on the all the way up now the most important or one of them it's all important but this step i really want you to take serious because this is going to make or break the look of the stair is the crease between here and here okay what we want to do is we want to take our stair tool and we want to push down and we want to find that groove the groove of the stair the 90.

13:19 we're going to push the corner the edge of this in back and forth whatever's either you can do it one way you can do it the other way until that line is square like i haven't even popped a staple in that line yet look at how nice and straight that is okay that's gonna be a money shot there once you've got that in take your stable gun maybe every three inches push on the 45 into that groove i'm out of staples that's good that you guys are going to see that see i ran out go back and i continue

14:10 and now the final step for that stair is take your carpet tucker and your hammer and now i want you to bang that in all the way along and that look at that groove i mean it's perfect smooth nice and tight okay now moving on up this is how you're going to do all the stairs now all we're going to do is repeat on the next stair and then we're going to show you how to finish this this riser off here so stay tuned let's walk through it so remember we're going to check our measurements loosely right we said we were about seven inches right we need to be about seven inches again to the binding and we are over here we're seven

14:56 and over here we're seven okay so we're good so let's form our carpet again we're just pre-bending it and pre-forming it just to make those staples go in a little easier now this car is pretty soft but the some carpets get really really stiff and so i just kind of do the same method all the time i've found that this method just works the best so underneath the nose on a 45 one two three four five every inch or two you'll get a better line if you're every inch now you guys can run your hand along there but you can see here that you cannot see that line underneath but as you get up farther and the top stairs as

15:43 you guys can see here let's say we're we're sitting here you can start to see under that nose of those stairs over there so what we do in a case like this is no different than when we scored this bottom we take the edge of our tucker and we underscore the nose here and that gives us that great straight line just a little time a little pressure and now we have a beautiful line under here and a beautiful line under here now let's move up any runner that we ship out with genie's runner she's actually got two separate runners she's got um like i said she has a few going up maybe five going up 5.5 and

16:30 then 6.5 on her other flight but they're two separate flights just kind of like these are right she's got a landing that she is not installing carpet on but then she's got another flight that goes up six so we have to learn how to end that and the runners that i sent genie both have a top and a bottom and now when you order carbon runners from us you're going to you're going to stipulate how many ends that you need and i will ship you the ends that you need so here's the top and so what i'm going to do is i'm going to take my knife right i kind of know that that's my end there so i can just score it a little bit i'm not going to cut on that line but you can see i always send extra so

17:15 you guys have got an extra inch there i am just going to use a sharp blade try not to cut through that would be very bad you don't want to score the carpet on the other side it's better to actually pre-measure it all right so we've got our this is called a riser and that is going to go right here okay with the finished edge but that finished edge is going to go nicely underneath there i'm going to do that after this is also one of the money shots now we're gonna do the same method never changes per stair we're gonna take our kicker now if you don't use a kicker and you don't put this pressure on you can see this thing moving you don't put that pressure on and you try to do it

18:01 with your hand you can do it but it's going to be it's going to be loose okay that's why we take a kicker and we put that pressure on you can see that pressure i lift that off there look at that pressure okay now again maybe you've put tape all the way along and you know your lines i'm going to measure i know i'm supposed to be at seven to the binding i'm seven to the binding i don't have to measure the other side because i already know if i'm seven there i'm seven there all right same thing pressure one two three on that side

18:49 okay pressure one two three on this side no need for the kicker we're gonna score this and then we're gonna once we get that 45 in there we're going to take our sharp blade and we're going to start on the left side we're going to cut to the middle we're going to start at the right side and cut into the middle that way you do not rip the binding on the outside we're gonna blow all our uh our carpet chunks out of there

19:36 take our stretcher our kicker and i'm just going to staple that all down all the way down there now these two stairs are done it's nice with that with the sewn edge and now we have to address the top now like we said before on this staircase at the uh at the studio here where i do some of the videos is we can wrap this over and put the landing but jeannie is not putting a landing so she has finished hardwood here and we have to finish the carpet riser under here now could you just cut a piece could you just measure from here to here and here to here and throw in a chunk sure you can but we've got this nice finished edge here and trust me at the top of the stairs it's going to look golden right because that's going to finish under there like that it's going to be nice rather than a fraying edge

20:24 so here we want our binding to meet our binding so what we want to do is we'll we want to measure both sides right under the nose down to the bottom of the stair it's six inches from here to here not to the carpet from here to here on the wood and then we're gonna go over here and we're gonna do the same thing from the top right down to the bottom says six and an eighth so i am going to make that adjustment okay this is a money shot putting in the car runners is easy finishing you got to be on all right so

21:12 in order to do this riser properly we need a measurement on the left hand side from the bottom to the top six inches and that's from wood to wood from underneath to the bottom of the stair this six and an eighth so we're going to make that on our piece okay now i'm going to turn that piece upside down i hope you guys get a good view here all right and now because that's backwards now one side six and an eight which i'm going to measure now i have a pencil to mark my back i know that the other side was six and an eighth and i'm going to measure from the top to six and an eighth and i've got my pencil mark there and i know that this side because remember this is upside down this is backwards i know that this side right remember

21:59 from here to here was six inches all right let's my tape measure is a little broken but that's okay there's six all right all right now i'm gonna take a straight edge and i'm just gonna line those two up the two pencil marks on each side okay i just used a pencil on that now you can use a knife in a straight edge to do this i'm going to do it with my pair of scissors if you don't have scissors like i said you can use a knife but you want to cut from the outside in you should try to use a pair of scissors on on this now

22:48 i'm going to cut through there and i'm going to cut on the top side of this line all the way down i don't want to see that line but on the outside watch what i'm going to do watch this i'm going to go back to the inside of the line so you can see it and what that does is it makes it go down a little bit farther and makes this kind of go up let's have a look at it okay clean it off let's have a peek okay let's fit it on the one side i'm going to push down okay and then push that little tab under fold this under like that

23:34 i'm going to do that all the way down now it's a little tight okay you can see it bulging there a little bit now it's a little tight i'd rather it be a little tight than uh then loose i'm just gonna shave a little tiny bit of it i mean an eighth of an inch the tiniest bit because like i said i would way rather have more than a gap then a gap it doesn't look like you want to look continuous you want it to look like you never cut this off all right here we go all right

24:20 now let's try that fit it on the one side push down flip the tab look at that i don't have to staple that that is perfect look at how great that looks i haven't even stapled yet so let's uh do that one more time let's pull it off and give you before i staple it let's pull it off and give you a view okay all right we measured on each side on this side it was six and an eighth and i shaved a little bit off all the way down it was six down here on the end

25:08 we're going to put that in there now we'll start on this side which is different see that we're going to push down line those up put that underneath if your uh if your stair comes with a little tab like that just flip the tab underneath and then we're going to fit that all the way down that is a beautiful beautiful fit that's a little tight on this end i will take my tucker and hit that down a little bit i don't want to force it too much because then it'll show the kinks okay now i have no now you guys watch that in real time okay i did not edit that nosing at all so let's just see okay let's have a look at this again there are no gaps i haven't even stapled

25:56 it it's fitting perfectly and now this is where the secret little tricks and stuff like that that you want to get good at okay and there's a side view for you okay let's pop a couple staples in and finish this up one on the bottom left one on the bottom right wiggle it and then every five inches try to go in those lines so you can't see the staples wiggle and at the top

Automatically transcribed from the source video.

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Stair Runners for Wooden Steps (Guided Tutorial) — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.