Apply Peel-and-Stick Carpet Treads
From How to Install Carpet Treads on Stairs with a Deep Nosing Overhang · Step 4 of 7 · Video by Oak Valley Designs

Showing 0:16–0:21 of the source video. Watch the full video with every moment.
What happens in this clip
With the guide lines in place, take each carpet stair tread, peel off its protective backing to reveal the adhesive, and carefully position it onto the stair, aligning it precisely with the blue painter's tape guides. Press down firmly across the entire surface of the tread to ensure strong adhesion. Repeat this process for all stairs.
Goal: Securely attach carpet treads to each stair
What's used
Materials
- Oak Valley Designs Carpet Stair Treads Oak Valley Designs
About the full video
This project involves installing peel-and-stick carpet stair treads on wooden stairs to improve safety, comfort, and aesthetics. The process includes unboxing the treads, measuring and marking the stairs for consistent placement, and then applying each tread.
Step 4 of 7: Apply Adhesive to Treads
Depending on the adhesive type, apply it either to the back of the dry-fit carpet tread or directly onto the stair tread surface. Ensure even coverage across the entire area that will contact the stair, paying special attention to the nosing. Use an adhesive recommended for carpets and wood or your specific stair material, and follow the manufacturer's instructions regarding application method and drying/tack time.
Every video in How to Install Carpet Treads on Stairs with a Deep Nosing Overhang
Step 1: Measure Existing Tread Depth and Nosing
- 0:57–1:16 Measure Treads and Mark Laminate
- 0:46–1:05 Measure and Cut Underlayment
- 0:12–0:57 Measure and Cut Carpet Tread
Step 2: Cut Carpet Treads to Size
- 7:20–9:07 Measure and Cut Carpet
- 0:12–0:57 Measure and Cut Carpet Tread
- 2:09–3:19 Measure and Cut Carpet Pieces
Step 3: Dry Fit and Trim Carpet Treads
- 2:13–2:35 Test Fit and Adjust Treads
- 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
- 0:57–2:36 Pre-form and Secure Carpet Underneath Tread
Step 4: Apply Adhesive to Treads
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads (this video)
Step 5: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:59–2:07 Install First Stair Tread
- 0:11–0:43 Install Remaining Carpet Stair Treads
Step 6: Secure Nosing Overhang
- 0:57–2:36 Pre-form and Secure Carpet Underneath Tread
- 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
- 12:05–14:25 Fold and Staple Carpet Over Next Nose
Step 7: Allow Adhesive to Cure
- 3:06–3:19 Project Completion
- 3:44–4:26 Final Curing and Caulking
- 0:31–0:38 Inspect and Finish Installation
How to Install Carpet Treads on Stairs with a Deep Nosing Overhang
This project outlines the steps for installing carpet treads on stairs that have a deep nosing overhang. It covers measuring, cutting, fitting, and securing the treads to ensure a safe and aesthetically pleasing result.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

