Install First Stair Tread
From How to Install Carpet Treads on Stairs with a Deep Nosing Overhang · Step 5 of 7 · Video by Oak Valley Designs

Showing 0:59–2:07 of the source video. Watch the full video with every moment.
What happens in this clip
Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn't perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.
Goal: Securely attach the first carpet stair tread
What's used
Tools
- Oak Valley Designs Bullnose Carpet Stair Tread Oak Valley Designs
About the full video
This project demonstrates the straightforward installation of Oak Valley Designs' Bullnose Carpet Stair Treads and a matching Landing Pad. The video highlights the product's features, including a reinforced front edge, built-in padding, and pressure-sensitive adhesive, which allows for easy, repositionable, and non-damaging application to wooden stairs, enhancing safety and aesthetics.
Step 5 of 7: Install Carpet Treads
With the adhesive applied, carefully align the carpet tread with the stair tread. Press down firmly, starting from the back and working towards the nosing, to ensure full contact and adhesion. Apply even pressure across the entire surface, especially along the edges and over the nosing, to eliminate any air bubbles and create a strong bond. Use a roller or your hands to press firmly.
Every video in How to Install Carpet Treads on Stairs with a Deep Nosing Overhang
Step 1: Measure Existing Tread Depth and Nosing
- 0:57–1:16 Measure Treads and Mark Laminate
- 0:46–1:05 Measure and Cut Underlayment
- 0:12–0:57 Measure and Cut Carpet Tread
Step 2: Cut Carpet Treads to Size
- 7:20–9:07 Measure and Cut Carpet
- 0:12–0:57 Measure and Cut Carpet Tread
- 2:09–3:19 Measure and Cut Carpet Pieces
Step 3: Dry Fit and Trim Carpet Treads
- 2:13–2:35 Test Fit and Adjust Treads
- 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
- 0:57–2:36 Pre-form and Secure Carpet Underneath Tread
Step 4: Apply Adhesive to Treads
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:59–2:07 Install First Stair Tread (this video)
- 0:11–0:43 Install Remaining Carpet Stair Treads
Step 6: Secure Nosing Overhang
- 0:57–2:36 Pre-form and Secure Carpet Underneath Tread
- 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
- 12:05–14:25 Fold and Staple Carpet Over Next Nose
Step 7: Allow Adhesive to Cure
- 3:06–3:19 Project Completion
- 3:44–4:26 Final Curing and Caulking
- 0:31–0:38 Inspect and Finish Installation
How to Install Carpet Treads on Stairs with a Deep Nosing Overhang
This project outlines the steps for installing carpet treads on stairs that have a deep nosing overhang. It covers measuring, cutting, fitting, and securing the treads to ensure a safe and aesthetically pleasing result.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

