Inspect and Finish Installation
From How to Install Carpet Treads on Stairs with a Deep Nosing Overhang · Step 7 of 7 · Video by Jones Knows

Showing 0:31–0:38 of the source video. Watch the full video with every moment.
What happens in this clip
Visually inspect the installed vinyl stair tread to ensure it is perfectly aligned, securely adhered, and free of any gaps or lifted edges. Repeat the process for all remaining stair treads to complete the staircase. Allow adequate time for the adhesive to fully cure according to the manufacturer's instructions before putting the stairs into regular use. The finished result showcases a durable and aesthetically pleasing staircase.
Goal: After installation, inspect the newly installed vinyl stair tread for proper placement and adhesion, ensuring a professional and durable finish.
About the full video
This video showcases the installation of custom-made solid vinyl stair treads using an adhesive method. The installer highlights the durability and aesthetic appeal of vinyl as a superior alternative to traditional wood for staircases, demonstrating the application of construction adhesive and hot glue before precisely placing the vinyl tread.
Step 7 of 7: Allow Adhesive to Cure
After all carpet treads have been installed and pressed down, allow the adhesive to cure completely. Refer to the adhesive manufacturer's instructions for the recommended curing time. This typically ranges from 24 to 72 hours. During this period, avoid heavy foot traffic on the stairs to ensure the treads are securely bonded and do not shift.
Every video in How to Install Carpet Treads on Stairs with a Deep Nosing Overhang
Step 1: Measure Existing Tread Depth and Nosing
- 0:57–1:16 Measure Treads and Mark Laminate
- 0:46–1:05 Measure and Cut Underlayment
- 0:12–0:57 Measure and Cut Carpet Tread
Step 2: Cut Carpet Treads to Size
- 7:20–9:07 Measure and Cut Carpet
- 0:12–0:57 Measure and Cut Carpet Tread
- 2:09–3:19 Measure and Cut Carpet Pieces
Step 3: Dry Fit and Trim Carpet Treads
- 2:13–2:35 Test Fit and Adjust Treads
- 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
- 0:57–2:36 Pre-form and Secure Carpet Underneath Tread
Step 4: Apply Adhesive to Treads
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:59–2:07 Install First Stair Tread
- 0:11–0:43 Install Remaining Carpet Stair Treads
Step 6: Secure Nosing Overhang
- 0:57–2:36 Pre-form and Secure Carpet Underneath Tread
- 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
- 12:05–14:25 Fold and Staple Carpet Over Next Nose
Step 7: Allow Adhesive to Cure
- 3:06–3:19 Project Completion
- 3:44–4:26 Final Curing and Caulking
- 0:31–0:38 Inspect and Finish Installation (this video)
How to Install Carpet Treads on Stairs with a Deep Nosing Overhang
This project outlines the steps for installing carpet treads on stairs that have a deep nosing overhang. It covers measuring, cutting, fitting, and securing the treads to ensure a safe and aesthetically pleasing result.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

