Trim and Finish Edges
From How to Install Carpet Treads on Stairs with an Open Side · Step 6 of 6 · Video by Direct Carpet

Showing 1:28–2:59 of the source video. Watch the full video with every moment.
What happens in this clip
With the main body of the carpet runners secured, focus on the edges. Use a sharp utility knife to carefully trim any excess carpet along the sides of each runner, ensuring a clean, straight cut. Employ the stair tool to tuck these cut edges neatly under any existing side trim (like a stringer or baseboard) or firmly against the wall. For particularly stubborn areas or if extra security is desired, use the staple gun to add a few more staples along the side edges, ensuring they are hidden or discreet. This attention to detail creates a polished and professional finish.
Goal: Achieve a clean and professional finish for the carpet runners.
What's used
Tools
- Extra Blades
- Stair Tool
- Carpet bolster tool
- Staple Gun Unknown (looks like an electric stapler)
- Heavy-duty manual stapler
- Utility Knife Unknown (silver with red handle)
- Exacto knife (for fine details)
Materials
- Staples
About the full video
This project provides a step-by-step guide to installing carpet runners on a staircase. It covers preparing the stairs by removing old materials, installing new tack strips and padding, precisely positioning and securing the carpet runners using a staple gun and stair tools, and finally trimming and finishing the edges for a professional look.
Step 6 of 6: Trim Excess Carpet
Once the adhesive has set, inspect the edges of the installed carpet treads. Carefully use a sharp utility knife to trim away any small pieces of excess carpet material that may have squeezed out or are protruding. Pay close attention to the open side to ensure a smooth, finished edge.
Every video in How to Install Carpet Treads on Stairs with an Open Side
Step 1: Clean Stair Treads
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
- 0:18–0:31 Clean the Stairs
Step 2: Measure and Mark Carpet Treads
- 0:12–0:57 Measure and Cut Carpet Tread
- 7:20–9:07 Measure and Cut Carpet
- 0:16–0:27 Measure and Cut Carpet Sections
Step 3: Cut Carpet Treads
- 8:08–9:23 Cut Carpet Pieces
- 0:12–0:57 Measure and Cut Carpet Tread
- 0:37–0:59 Measure and Cut Carpet
Step 4: Apply Adhesive
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:33–0:39 Apply Adhesive and Lay First Pieces
Step 5: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:11–0:43 Install Remaining Carpet Stair Treads
Step 6: Trim Excess Carpet
- 1:28–2:59 Trim and Finish Edges (this video)
- 0:09–0:56 Trim Excess Carpet and Complete Installation
- 18:37–22:17 Trim and Tuck Side Edges
How to Install Carpet Treads on Stairs with an Open Side
A high-level outline for installing carpet treads on stairs with an open side. This involves preparing the stairs, cutting the carpet treads to size, and securely attaching them to the stairs, ensuring proper fit and adhesion, especially on the open side where additional care may be needed for a clean finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

