Install Carpet Treads with Adhesive
From How to Install Carpet Treads on Stairs with an Open Side · Step 5 of 6 · Video by Oak Valley Designs

Showing 1:16–2:09 of the source video. Watch the full video with every moment.
What happens in this clip
Take a carpet tread from its box. The easiest and most rewarding part is installation. First, peel off the protective backing from the adhesive strip on the back of the tread. Position the carpet tread by hooking its bullnose (the front edge) underneath the bottom edge of the stair tread. Then, gently pull back on the tread with one hand to ensure it's nice and tight against the bullnose. Once taut, press firmly across the entire surface of the tread, ensuring it adheres securely. Use the painter's tape as a guide to maintain perfect alignment, ensuring everything is straight.
Goal: Peel off the protective backing from the carpet tread, hook it under the bullnose of the stair, and then firmly press and align it using the painter's tape guide.
What's used
Tools
- Carpet treads
About the full video
This project provides step-by-step instructions for easily installing carpet treads onto stairs using strong adhesive tape. It covers preparing the stairs by cleaning them, marking alignment with painter's tape, and then securely attaching the self-adhesive carpet treads for a secure and streamlined look.
What's said in this clip
Okay, the easiest part and the most rewarding part after all your measuring and hard work. These are your treads. They come in a box. Okay, all you do is peel off the back. Throw that in the floor. I've already put a few on, so I'm going to do the top step. Now, you see our painters tape is still here to guide us on the edge. So, everything is in alignment. You come to the next step and the first thing you do is hook the bullnose underneath the bottom edge and then pull back with this hand to make sure that it's nice and tight. So, as you press on the front and you pull on the back, put a little pressure across the tread, make sure it's lined up with the painters tape, and that's it. It's that easy.
Automatically transcribed from the source video.
Step 5 of 6: Install Carpet Treads
Align the carpet tread with the stair tread, starting from the back and working forward. Press down firmly, using your hands or a small roller, to ensure good contact and adhesion. For the open side, carefully wrap the carpet around the edge and press it firmly into place, using a small piece of wood or a smooth tool to help conform the carpet to the stair profile.
Every video in How to Install Carpet Treads on Stairs with an Open Side
Step 1: Clean Stair Treads
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
- 0:18–0:31 Clean the Stairs
Step 2: Measure and Mark Carpet Treads
- 0:12–0:57 Measure and Cut Carpet Tread
- 7:20–9:07 Measure and Cut Carpet
- 0:16–0:27 Measure and Cut Carpet Sections
Step 3: Cut Carpet Treads
- 8:08–9:23 Cut Carpet Pieces
- 0:12–0:57 Measure and Cut Carpet Tread
- 0:37–0:59 Measure and Cut Carpet
Step 4: Apply Adhesive
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:33–0:39 Apply Adhesive and Lay First Pieces
Step 5: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive (this video)
- 0:11–0:43 Install Remaining Carpet Stair Treads
Step 6: Trim Excess Carpet
- 1:28–2:59 Trim and Finish Edges
- 0:09–0:56 Trim Excess Carpet and Complete Installation
- 18:37–22:17 Trim and Tuck Side Edges
How to Install Carpet Treads on Stairs with an Open Side
A high-level outline for installing carpet treads on stairs with an open side. This involves preparing the stairs, cutting the carpet treads to size, and securely attaching them to the stairs, ensuring proper fit and adhesion, especially on the open side where additional care may be needed for a clean finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

