Install Remaining Carpet Stair Treads
From How to Install Carpet Treads on Stairs with an Open Side · Step 5 of 6 · Video by Oak Valley Designs

Showing 0:11–0:43 of the source video. Watch the full video with every moment.
What happens in this clip
Once a tread is aligned, firmly press it down to secure it in place. The video implies an adhesive backing on the treads, as no other fastening method is shown. Repeat this process for the remaining stairs: place a new carpet tread, ensure it is centered and straight by visual inspection or quick checks with the tape measure against the previous tread or stair edge, and then firmly press it down to adhere. Continue this process for all steps on the staircase until all treads are installed.
Goal: Securely install all carpet treads on the staircase
What's used
Tools
- Carpet Stair Tread
- Hands
- Tape Measure Lufkin
- Ruler
About the full video
This project demonstrates the straightforward process of installing pre-cut carpet stair treads onto a wooden staircase. It focuses on careful measurement, alignment, and secure placement of each tread to enhance both the safety and aesthetic appeal of the stairs.
Step 5 of 6: Install Carpet Treads
Align the carpet tread with the stair tread, starting from the back and working forward. Press down firmly, using your hands or a small roller, to ensure good contact and adhesion. For the open side, carefully wrap the carpet around the edge and press it firmly into place, using a small piece of wood or a smooth tool to help conform the carpet to the stair profile.
Every video in How to Install Carpet Treads on Stairs with an Open Side
Step 1: Clean Stair Treads
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
- 0:18–0:31 Clean the Stairs
Step 2: Measure and Mark Carpet Treads
- 0:12–0:57 Measure and Cut Carpet Tread
- 7:20–9:07 Measure and Cut Carpet
- 0:16–0:27 Measure and Cut Carpet Sections
Step 3: Cut Carpet Treads
- 8:08–9:23 Cut Carpet Pieces
- 0:12–0:57 Measure and Cut Carpet Tread
- 0:37–0:59 Measure and Cut Carpet
Step 4: Apply Adhesive
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:33–0:39 Apply Adhesive and Lay First Pieces
Step 5: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:11–0:43 Install Remaining Carpet Stair Treads (this video)
Step 6: Trim Excess Carpet
- 1:28–2:59 Trim and Finish Edges
- 0:09–0:56 Trim Excess Carpet and Complete Installation
- 18:37–22:17 Trim and Tuck Side Edges
How to Install Carpet Treads on Stairs with an Open Side
A high-level outline for installing carpet treads on stairs with an open side. This involves preparing the stairs, cutting the carpet treads to size, and securely attaching them to the stairs, ensuring proper fit and adhesion, especially on the open side where additional care may be needed for a clean finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

