Apply Adhesive to Treads
From How to Install Carpet Treads on Stairs with an Open Side · Step 4 of 6 · Video by Oak Valley Designs

Showing 0:05–0:06 of the source video. Watch the full video with every moment.
What happens in this clip
After cutting a stair tread to its final size, flip it over to expose its underside. Apply a generous amount of strong construction adhesive or specialized carpet adhesive to the back of the tread. Distribute the adhesive evenly, focusing on applying a continuous bead around the perimeter and adding a few wavy beads or dots in the center. This ensures maximum adhesion across the entire surface and helps prevent future lifting.
Goal: Securely bond the treads to the stair steps
What's used
Tools
- Caulk gun
- Construction adhesive
- Liquid Nails
- Stair treads
About the full video
This project provides a step-by-step guide on how to install pre-made stair treads onto a wooden staircase. The process involves precise measurement and dry-fitting, cutting the treads to size, applying adhesive for secure bonding, and finally, fastening the treads with a staple gun to ensure a durable and aesthetically pleasing finish.
Step 4 of 6: Apply Adhesive
Depending on the type of carpet tread and adhesive used, apply a consistent layer of adhesive to either the back of the carpet tread, the stair tread surface, or both. Ensure even coverage, especially around the edges and corners, to promote full adhesion. For contact cement, apply to both surfaces and allow it to become tacky before joining.
Every video in How to Install Carpet Treads on Stairs with an Open Side
Step 1: Clean Stair Treads
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
- 0:18–0:31 Clean the Stairs
Step 2: Measure and Mark Carpet Treads
- 0:12–0:57 Measure and Cut Carpet Tread
- 7:20–9:07 Measure and Cut Carpet
- 0:16–0:27 Measure and Cut Carpet Sections
Step 3: Cut Carpet Treads
- 8:08–9:23 Cut Carpet Pieces
- 0:12–0:57 Measure and Cut Carpet Tread
- 0:37–0:59 Measure and Cut Carpet
Step 4: Apply Adhesive
- 0:05–0:06 Apply Adhesive to Treads (this video)
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:33–0:39 Apply Adhesive and Lay First Pieces
Step 5: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:11–0:43 Install Remaining Carpet Stair Treads
Step 6: Trim Excess Carpet
- 1:28–2:59 Trim and Finish Edges
- 0:09–0:56 Trim Excess Carpet and Complete Installation
- 18:37–22:17 Trim and Tuck Side Edges
How to Install Carpet Treads on Stairs with an Open Side
A high-level outline for installing carpet treads on stairs with an open side. This involves preparing the stairs, cutting the carpet treads to size, and securely attaching them to the stairs, ensuring proper fit and adhesion, especially on the open side where additional care may be needed for a clean finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

