powered by

Measure and Cut Carpet Sections

From How to Install Carpet Treads on Stairs with an Open Side · Step 2 of 6 · Video by Fantum Karpets

Showing 0:16–0:27 of the source video. Watch the full video with every moment.

What happens in this clip

Begin by thoroughly cleaning the existing wooden stairs to remove any dust, debris, or old adhesive residue. Then, use a measuring tape to accurately determine the dimensions of each stair tread (the horizontal part) and riser (the vertical part). Also, measure any landing areas. Lay out the bulk carpet material on a clean, flat surface. Using a measuring tape and a long straight edge, mark the precise cutting lines for each individual carpet section required for the treads, risers, and any curved or landing areas. Carefully cut the carpet along these lines using a sharp utility knife, ensuring all pieces are accurately sized for their specific locations on the stairs.

Goal: Obtain accurately sized carpet pieces for all stair components

What's used

Tools

  • Measuring Tape
  • Straight Edge (Long Ruler)
  • Yardstick
  • Utility Knife
  • Heavy-duty scissors

Materials

  • Carpet

About the full video

This project provides a detailed guide on how to install carpet on wooden stairs, covering essential steps from precise measurement and carpet cutting to adhesive application, careful laying, and securing the carpet with staples and trimming for a professional finish. It demonstrates techniques for handling various stair shapes and ensuring a durable and aesthetically pleasing result.

Step 2 of 6: Measure and Mark Carpet Treads

Using a tape measure, record the exact width and depth of each stair tread. For treads on the open side of the stairs, also measure the profile of the stair edge to ensure the carpet tread will wrap around cleanly. Transfer these measurements to the back of the carpet tread material, marking cut lines with a chalk line or a fabric marker.

Open this step in the guide

Every video in How to Install Carpet Treads on Stairs with an Open Side

  1. Step 1: Clean Stair Treads

  2. Step 2: Measure and Mark Carpet Treads

  3. Step 3: Cut Carpet Treads

  4. Step 4: Apply Adhesive

  5. Step 5: Install Carpet Treads

  6. Step 6: Trim Excess Carpet

How to Install Carpet Treads on Stairs with an Open Side

A high-level outline for installing carpet treads on stairs with an open side. This involves preparing the stairs, cutting the carpet treads to size, and securely attaching them to the stairs, ensuring proper fit and adhesion, especially on the open side where additional care may be needed for a clean finish.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Measure and Cut Carpet Sections — How to Install Carpet Treads on Stairs with an Open Side | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.