Apply Carpet Adhesive to Stairs
From How to Install Carpet Treads on Stairs with an Open Side · Step 4 of 6 · Video by Fantum Karpets

Showing 0:34–0:46 of the source video. Watch the full video with every moment.
What happens in this clip
Prepare the carpet adhesive by stirring it thoroughly. Use a small piece of scrap cardboard or a protective sheet to shield the wall and any already carpeted areas from excess adhesive. Using a specialized adhesive spreader (trowel) with appropriate notched teeth, apply a generous and even layer of carpet adhesive to the surface of the stair tread and riser you are currently working on. Ensure the entire area to be covered by carpet is coated with adhesive for optimal bonding. The notched trowel helps create ridges in the adhesive, which promotes stronger adhesion and proper curing.
Goal: Prepare stair surfaces for carpet adhesion
What's used
Tools
- Richard 9" Adhesive Spreader Richard
Materials
- Cardboard (scrap)
- Carpet Adhesive
About the full video
This project provides a detailed guide on how to install carpet on wooden stairs, covering essential steps from precise measurement and carpet cutting to adhesive application, careful laying, and securing the carpet with staples and trimming for a professional finish. It demonstrates techniques for handling various stair shapes and ensuring a durable and aesthetically pleasing result.
Step 4 of 6: Apply Adhesive
Depending on the type of carpet tread and adhesive used, apply a consistent layer of adhesive to either the back of the carpet tread, the stair tread surface, or both. Ensure even coverage, especially around the edges and corners, to promote full adhesion. For contact cement, apply to both surfaces and allow it to become tacky before joining.
Every video in How to Install Carpet Treads on Stairs with an Open Side
Step 1: Clean Stair Treads
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
- 0:18–0:31 Clean the Stairs
Step 2: Measure and Mark Carpet Treads
- 0:12–0:57 Measure and Cut Carpet Tread
- 7:20–9:07 Measure and Cut Carpet
- 0:16–0:27 Measure and Cut Carpet Sections
Step 3: Cut Carpet Treads
- 8:08–9:23 Cut Carpet Pieces
- 0:12–0:57 Measure and Cut Carpet Tread
- 0:37–0:59 Measure and Cut Carpet
Step 4: Apply Adhesive
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs (this video)
- 0:33–0:39 Apply Adhesive and Lay First Pieces
Step 5: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:11–0:43 Install Remaining Carpet Stair Treads
Step 6: Trim Excess Carpet
- 1:28–2:59 Trim and Finish Edges
- 0:09–0:56 Trim Excess Carpet and Complete Installation
- 18:37–22:17 Trim and Tuck Side Edges
How to Install Carpet Treads on Stairs with an Open Side
A high-level outline for installing carpet treads on stairs with an open side. This involves preparing the stairs, cutting the carpet treads to size, and securely attaching them to the stairs, ensuring proper fit and adhesion, especially on the open side where additional care may be needed for a clean finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

