Measure and Cut Carpet
From How to Install Carpet Treads on Stairs with an Open Side · Step 3 of 6 · Video by Cunner Outdoors

Showing 0:37–0:59 of the source video. Watch the full video with every moment.
What happens in this clip
A large piece of carpet is rolled out on the floor. The width of each stair step is carefully measured using a tape measure. A straight edge is then aligned with the measurement, and a utility knife is used to precisely cut the carpet to the required size for each step. This ensures that each carpet piece fits snugly across the width of its respective stair.
Goal: Prepare custom-sized carpet pieces for each stair
What's used
Tools
- Straight Edge
- Metal bar
- Tape Measure
- Ruler
- Utility Knife
- Razor knife
Materials
- Carpet
About the full video
This project details the step-by-step process of installing carpet on a set of stairs. It begins by preparing the concrete stairs with tack strips and applying flooring adhesive for underlayment. The carpet is then precisely measured and cut, followed by securing it to the stairs using a staple gun and a specialized stair tool to ensure a tight, professional finish.
Step 3 of 6: Cut Carpet Treads
Using a sharp utility knife or heavy-duty scissors, carefully cut along the marked lines on the carpet tread material. For a clean cut, you may need to make multiple passes with the utility knife. Ensure that the cuts are straight and square, especially for the edges that will meet the riser or the open side of the stair.
Every video in How to Install Carpet Treads on Stairs with an Open Side
Step 1: Clean Stair Treads
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
- 0:18–0:31 Clean the Stairs
Step 2: Measure and Mark Carpet Treads
- 0:12–0:57 Measure and Cut Carpet Tread
- 7:20–9:07 Measure and Cut Carpet
- 0:16–0:27 Measure and Cut Carpet Sections
Step 3: Cut Carpet Treads
- 8:08–9:23 Cut Carpet Pieces
- 0:12–0:57 Measure and Cut Carpet Tread
- 0:37–0:59 Measure and Cut Carpet (this video)
Step 4: Apply Adhesive
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:33–0:39 Apply Adhesive and Lay First Pieces
Step 5: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:11–0:43 Install Remaining Carpet Stair Treads
Step 6: Trim Excess Carpet
- 1:28–2:59 Trim and Finish Edges
- 0:09–0:56 Trim Excess Carpet and Complete Installation
- 18:37–22:17 Trim and Tuck Side Edges
How to Install Carpet Treads on Stairs with an Open Side
A high-level outline for installing carpet treads on stairs with an open side. This involves preparing the stairs, cutting the carpet treads to size, and securely attaching them to the stairs, ensuring proper fit and adhesion, especially on the open side where additional care may be needed for a clean finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

