Sand and Final Clean
From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 8 of 9 · Video by Jones Knows

Showing 2:19–2:43 of the source video. Watch the full video with every moment.
What happens in this clip
Once the treads are completely dry, proceed with sanding. Start with a coarser grit sandpaper, such as 120-grit, attached to an orbital sander (a Dewalt sander is shown) to smooth out any remaining imperfections or rough spots on the wood. Then, switch to a finer grit, like 220-grit, for a final pass to achieve a perfectly smooth surface. The video emphasizes getting all corners, crevices, and any areas where stain or finish will be applied perfectly smooth. Use an orbital sander connected to a HEPA filter vacuum (a Festool Cleantec vacuum is shown) to efficiently collect sawdust and minimize airborne particles. After sanding, meticulously remove all remaining dust from the treads to ensure a clean surface for the new stain and finish.
Goal: Achieve a perfectly smooth, dust-free surface on the treads.
What's used
Tools
- 120-Grit Sandpaper
- 220-Grit Sandpaper
- Dust Mask/Respirator
- HEPA Filter Vacuum Festool Cleantec
- Regular vacuum with a fine dust bag
- Orbital Sander Dewalt
- Palm sander
- Tack Cloth
About the full video
This DIY guide outlines the process of preparing wooden stair treads for a new stain and finish. It involves applying a chemical stripper to remove thick, old coatings, carefully scraping off the loosened material, thoroughly cleaning the treads, and then sanding them with progressively finer grits to achieve a smooth, dust-free surface ready for staining.
What's said in this clip
so my advice once you think you're done sanding and you got it completely smooth then sand some more sanding is not something you can cut corners on it has to be completely smooth you have to get all the corners all the crevices any place that you're going to put stain or finish on needs to be sanded perfect and then once you're done sanding you have to remove all the dust completely dust free [Music]
Automatically transcribed from the source video.
Step 8 of 9: Sand the Treads and Risers
Using medium-grit sandpaper (e.g., 120-grit), sand the entire surface of the treads and risers to remove any remaining imperfections, old finishes, or rough patches. Follow up with a finer grit (e.g., 220-grit) for a smoother finish. Vacuum or wipe down to remove all dust.
Every video in How to Remove Carpet Stair Treads Without Damaging the Finish
Step 1: Score and Cut Carpet Edges
- 0:15–0:39 Remove Stair Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:21–0:50 Remove the Carpet
Step 2: Peel Back Carpet
- 0:21–0:50 Remove the Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:15–0:39 Remove Stair Carpet
Step 3: Remove Carpet Padding
- 3:40–4:20 Remove Carpet Underpad
- 0:17–0:22 Remove Carpet Padding
- 0:09–0:13 Remove Carpet Padding
Step 4: Remove Staples and Fasteners
- 0:17–0:23 Remove Staples
- 0:38–0:57 Remove Tack Strips and Staples
- 1:00–1:25 Remove Carpet Pad
Step 5: Clean the Wood Treads
- 0:04–0:07 Clean the Staircase
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
Step 6: Inspect for Damage
Step 7: Repair Wood Damage
- 0:06–0:07 Repairing Surface Imperfections
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 0:09–0:16 Apply Wood Filler to Minor Damage
Step 8: Sand the Treads and Risers
- 0:37–0:41 Sand the Staircase
- 2:06–2:52 Sand Stair Treads and Risers
- 2:19–2:43 Sand and Final Clean (this video)
Step 9: Apply Finish (Optional)
- 1:07–1:13 Apply Protective Finish Sealer
- 2:11–2:16 Apply a Clear Protective Finish
- 3:59–4:37 Apply Protective Finish
Questions about How to Remove Carpet Stair Treads Without Damaging the Finish
What are the essential tools I'll need to remove carpet stair treads without damaging the wood?
You'll definitely need a sturdy staple puller, pliers, and a carpet knife for cutting. A plastic putty knife is crucial for gently prying up carpet and padding without scratching the wood. Don't forget a shop vacuum for efficient cleanup of debris and staples.
What safety precautions should I take when working on stairs?
Always ensure good lighting, using a flashlight if needed, and keep the stairs clear of tools and debris to prevent trips. Wear sturdy gloves to protect your hands from sharp staples and carpet edges. Consider knee pads for comfort during prolonged kneeling.
Is removing carpet from stairs a difficult DIY project, and how long should I expect it to take?
This project is generally considered beginner-friendly, but it requires patience and attention to detail. While the estimated time is around 8 hours, it can vary based on the number of stairs and how well the carpet and padding are adhered. Take your time to avoid damaging the underlying wood.
How can I prevent damaging the wood finish underneath while removing the carpet and fasteners?
Use a plastic putty knife to gently pry up the carpet and padding, avoiding direct contact with metal tools on the wood. When removing staples, use a staple puller or pliers carefully, pulling them straight out rather than prying against the wood surface. Work slowly and deliberately to minimize scratches.
What's the best way to deal with stubborn staples or old adhesive residue on the wood?
For stubborn staples, use needle-nose pliers to grip and wiggle them out. For adhesive, apply a specialized adhesive remover like Henry Easy Release, following the product instructions carefully. Allow it to work, then gently scrape with a plastic scraper and wipe clean with microfiber cloths.
After removing the carpet, do I have to sand and refinish the wood treads, or can I just clean them?
While thorough cleaning is essential, sanding and refinishing are optional but highly recommended for the best results. If the wood is in good condition and you like its natural look, a deep clean and a protective sealer might suffice. However, refinishing allows you to repair damage, achieve a uniform look, and provide long-lasting protection.
How to Remove Carpet Stair Treads Without Damaging the Finish
A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

