Remove the Carpet
From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 2 of 9 · Video by The Home Depot

Showing 0:21–0:50 of the source video. Watch the full video with every moment.
What happens in this clip
Starting from the top, use a utility knife to carefully cut the carpet, especially under the nose of the landing (the overhang of the tread). Once an edge is created, use the vise-grip pliers to grab the carpet firmly and pull it free from the riser. Work your way down the stairs, gripping the carpet with both hands for balance and safety, and pulling from side to side. Cut the carpet into manageable sections as you go, and once a section is removed, roll it up, secure it with duct tape, and remove it from the worksite to keep the area clear.
Goal: Detach and remove carpet from the stairs
What's used
Tools
- Duct tape Nashua
- Leather gloves
- Utility knife and blades Husky
- Vise-grip pliers Milwaukee
About the full video
This DIY project provides step-by-step instructions on how to safely and efficiently remove old carpet and padding from stairs. It covers the removal of carpet, carpet padding, tack strips, and remaining fasteners, followed by cleaning and patching the stair surfaces to prepare them for a new finish.
Step 2 of 9: Peel Back Carpet
With the carpet scored, begin to carefully peel it back from the nosing of the stair tread, working your way down the riser. Try to pull it away in large sections if possible.
Every video in How to Remove Carpet Stair Treads Without Damaging the Finish
Step 1: Score and Cut Carpet Edges
- 0:15–0:39 Remove Stair Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:21–0:50 Remove the Carpet
Step 2: Peel Back Carpet
- 0:21–0:50 Remove the Carpet (this video)
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:15–0:39 Remove Stair Carpet
Step 3: Remove Carpet Padding
- 3:40–4:20 Remove Carpet Underpad
- 0:17–0:22 Remove Carpet Padding
- 0:09–0:13 Remove Carpet Padding
Step 4: Remove Staples and Fasteners
- 0:17–0:23 Remove Staples
- 0:38–0:57 Remove Tack Strips and Staples
- 1:00–1:25 Remove Carpet Pad
Step 5: Clean the Wood Treads
- 0:04–0:07 Clean the Staircase
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
Step 6: Inspect for Damage
Step 7: Repair Wood Damage
- 0:06–0:07 Repairing Surface Imperfections
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 0:09–0:16 Apply Wood Filler to Minor Damage
Step 8: Sand the Treads and Risers
- 0:37–0:41 Sand the Staircase
- 2:06–2:52 Sand Stair Treads and Risers
- 2:19–2:43 Sand and Final Clean
Step 9: Apply Finish (Optional)
- 1:07–1:13 Apply Protective Finish Sealer
- 2:11–2:16 Apply a Clear Protective Finish
- 3:59–4:37 Apply Protective Finish
How to Remove Carpet Stair Treads Without Damaging the Finish
A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

