Remove Carpet Underpad
From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 3 of 9 · Video by HouseImprovements

Showing 3:40–4:20 of the source video. Watch the full video with every moment.
What happens in this clip
Once the main carpet is removed, the underpad will be exposed. This foam-like material is typically stapled to the stair treads and risers. Start by finding an edge and pulling the underpad up. It should tear relatively easily. As you pull, be cautious of the tack strips underneath the underpad, as their sharp nails can cause injury. Dispose of the underpad in a garbage bag as it can break into many small, messy pieces.
Goal: Carefully tear off the carpet underpad, which is usually stapled down, being mindful of sharp tacks underneath.
What's used
Tools
- Work Gloves
Materials
- Garbage Bag
About the full video
This video provides a detailed guide on how to safely and efficiently remove old carpet and its underlying components (underpad, tack strips, staples) from stairs. The process covers cutting and pulling off carpet, detaching underpad, and carefully removing all fasteners from the treads, risers, and stringers, preparing the stairs for new flooring installations.
Step 3 of 9: Remove Carpet Padding
Once the main carpet is peeled back, remove the underlayment or padding. This is usually a foam or felt material and can typically be pulled out by hand.
Every video in How to Remove Carpet Stair Treads Without Damaging the Finish
Step 1: Score and Cut Carpet Edges
- 0:15–0:39 Remove Stair Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:21–0:50 Remove the Carpet
Step 2: Peel Back Carpet
- 0:21–0:50 Remove the Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:15–0:39 Remove Stair Carpet
Step 3: Remove Carpet Padding
- 3:40–4:20 Remove Carpet Underpad (this video)
- 0:17–0:22 Remove Carpet Padding
- 0:09–0:13 Remove Carpet Padding
Step 4: Remove Staples and Fasteners
- 0:17–0:23 Remove Staples
- 0:38–0:57 Remove Tack Strips and Staples
- 1:00–1:25 Remove Carpet Pad
Step 5: Clean the Wood Treads
- 0:04–0:07 Clean the Staircase
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
Step 6: Inspect for Damage
Step 7: Repair Wood Damage
- 0:06–0:07 Repairing Surface Imperfections
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 0:09–0:16 Apply Wood Filler to Minor Damage
Step 8: Sand the Treads and Risers
- 0:37–0:41 Sand the Staircase
- 2:06–2:52 Sand Stair Treads and Risers
- 2:19–2:43 Sand and Final Clean
Step 9: Apply Finish (Optional)
- 1:07–1:13 Apply Protective Finish Sealer
- 2:11–2:16 Apply a Clear Protective Finish
- 3:59–4:37 Apply Protective Finish
How to Remove Carpet Stair Treads Without Damaging the Finish
A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

