Clean the Staircase
From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 5 of 9 · Video by Oak Valley Designs

Showing 0:04–0:07 of the source video. Watch the full video with every moment.
What happens in this clip
Before installing the carpet stair treads, thoroughly clean the entire staircase. Begin by sweeping all wooden steps to remove any loose dust, dirt, or debris. Once swept, use a damp cloth to wipe down each step and the front edge (riser/nose) to ensure no fine dust or residue remains. This creates a clean, smooth surface for the adhesive treads to bond effectively.
Goal: Ensure stairs are clean and ready for tread application
What's used
Tools
- Broom
- Dustpan brush
- Cloth
- Microfiber cloth
About the full video
This project guides you through the simple process of installing pre-adhesive carpet stair treads to an existing wooden staircase. It involves thoroughly cleaning the stairs, peeling the protective backing from each tread, and then carefully positioning and firmly pressing the treads onto the steps. This DIY project transforms a bare wooden staircase into a more comfortable, quieter, and slip-resistant surface with an improved aesthetic.
Step 5 of 9: Clean the Wood Treads
Sweep or vacuum away any loose debris. Then, use a damp cloth and a wood-safe cleaner to wipe down the entire surface of the treads and risers. For stubborn adhesive, a specialized adhesive remover may be necessary.
Every video in How to Remove Carpet Stair Treads Without Damaging the Finish
Step 1: Score and Cut Carpet Edges
- 0:15–0:39 Remove Stair Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:21–0:50 Remove the Carpet
Step 2: Peel Back Carpet
- 0:21–0:50 Remove the Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:15–0:39 Remove Stair Carpet
Step 3: Remove Carpet Padding
- 3:40–4:20 Remove Carpet Underpad
- 0:17–0:22 Remove Carpet Padding
- 0:09–0:13 Remove Carpet Padding
Step 4: Remove Staples and Fasteners
- 0:17–0:23 Remove Staples
- 0:38–0:57 Remove Tack Strips and Staples
- 1:00–1:25 Remove Carpet Pad
Step 5: Clean the Wood Treads
- 0:04–0:07 Clean the Staircase (this video)
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
Step 6: Inspect for Damage
Step 7: Repair Wood Damage
- 0:06–0:07 Repairing Surface Imperfections
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 0:09–0:16 Apply Wood Filler to Minor Damage
Step 8: Sand the Treads and Risers
- 0:37–0:41 Sand the Staircase
- 2:06–2:52 Sand Stair Treads and Risers
- 2:19–2:43 Sand and Final Clean
Step 9: Apply Finish (Optional)
- 1:07–1:13 Apply Protective Finish Sealer
- 2:11–2:16 Apply a Clear Protective Finish
- 3:59–4:37 Apply Protective Finish
How to Remove Carpet Stair Treads Without Damaging the Finish
A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

