Remove Staples
From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 4 of 9 · Video by Dani Lyn Design

Showing 0:17–0:23 of the source video. Watch the full video with every moment.
What happens in this clip
Once all tack strips are gone, you will likely find numerous staples that were used to secure the carpet padding. This is often the most time-consuming part. Use a pair of pliers to firmly grip each staple and pull it straight out of the wood. Be thorough, as any remaining staples can cause injury or interfere with subsequent finishing steps. After pulling, place the staples in your collection bucket.
Goal: Extract all remaining staples from the stairs.
What's used
Tools
- Gloves
- Pliers
- End cutting pliers
Materials
- Bucket or Container
- Cardboard box
About the full video
This project provides a step-by-step guide on how to easily remove old carpet from stairs, including tack strips and staples. It aims to transform carpeted stairs into a much slicker and cleaner aesthetic, typically for painting or refinishing.
Step 4 of 9: Remove Staples and Fasteners
Using a pair of pliers or a staple remover tool, meticulously remove all staples, tack strips, and any other fasteners that were used to secure the carpet and padding. Pay close attention to the edges and corners.
Every video in How to Remove Carpet Stair Treads Without Damaging the Finish
Step 1: Score and Cut Carpet Edges
- 0:15–0:39 Remove Stair Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:21–0:50 Remove the Carpet
Step 2: Peel Back Carpet
- 0:21–0:50 Remove the Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:15–0:39 Remove Stair Carpet
Step 3: Remove Carpet Padding
- 3:40–4:20 Remove Carpet Underpad
- 0:17–0:22 Remove Carpet Padding
- 0:09–0:13 Remove Carpet Padding
Step 4: Remove Staples and Fasteners
- 0:17–0:23 Remove Staples (this video)
- 0:38–0:57 Remove Tack Strips and Staples
- 1:00–1:25 Remove Carpet Pad
Step 5: Clean the Wood Treads
- 0:04–0:07 Clean the Staircase
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
Step 6: Inspect for Damage
Step 7: Repair Wood Damage
- 0:06–0:07 Repairing Surface Imperfections
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 0:09–0:16 Apply Wood Filler to Minor Damage
Step 8: Sand the Treads and Risers
- 0:37–0:41 Sand the Staircase
- 2:06–2:52 Sand Stair Treads and Risers
- 2:19–2:43 Sand and Final Clean
Step 9: Apply Finish (Optional)
- 1:07–1:13 Apply Protective Finish Sealer
- 2:11–2:16 Apply a Clear Protective Finish
- 3:59–4:37 Apply Protective Finish
How to Remove Carpet Stair Treads Without Damaging the Finish
A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

