powered by

Remove Carpet Padding

From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 3 of 9 · Video by NikandLivDIY

Showing 0:09–0:13 of the source video. Watch the full video with every moment.

What happens in this clip

After the carpet is removed, the black underlayment, or carpet padding, will be exposed. This padding is often secured with staples or adhesive, and in this project, it was noted to be 'terrible to remove.' Begin by trying to pull up sections of the padding. If it's stuck, a pry bar or carpet scraper can be used to lift edges. Some padding might come up in large pieces, while other sections may tear and leave residue behind.

Goal: Clear the subfloor of the carpet padding layer.

What's used

Tools

  • Carpet Scraper
  • Long-handled razor scraper
  • Dust Mask
  • Pry Bar
  • Crowbar
  • especially where it's glued or stapled.
  • Work Gloves

About the full video

This project demonstrates the process of removing old carpet and its underlying padding to reveal existing hardwood floors. The task involves carefully pulling up the carpet, then tackling the often stubborn carpet padding and its adhesive residue, which may require extensive scraping.

What's said in this clip

Watch me uncover the original hardwood in less than 25 seconds. Smaller rolls are easier to carry out. This padding was terrible to remove. I had to use a putty knife and scrape one line at a time.

Automatically transcribed from the source video.

Step 3 of 9: Remove Carpet Padding

Once the main carpet is peeled back, remove the underlayment or padding. This is usually a foam or felt material and can typically be pulled out by hand.

Open this step in the guide

Every video in How to Remove Carpet Stair Treads Without Damaging the Finish

  1. Step 1: Score and Cut Carpet Edges

  2. Step 2: Peel Back Carpet

  3. Step 3: Remove Carpet Padding

  4. Step 4: Remove Staples and Fasteners

  5. Step 5: Clean the Wood Treads

  6. Step 6: Inspect for Damage

  7. Step 7: Repair Wood Damage

  8. Step 8: Sand the Treads and Risers

  9. Step 9: Apply Finish (Optional)

How to Remove Carpet Stair Treads Without Damaging the Finish

A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Remove Carpet Padding — How to Remove Carpet Stair Treads Without Damaging the Finish | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.