Remove Stair Carpet
From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 2 of 9 · Video by Ace Hardware

Showing 0:15–0:39 of the source video. Watch the full video with every moment.
What happens in this clip
Start at the very top of the stairs. Using a sharp utility knife, carefully cut the carpet along the edges where it meets the walls or any trim. Once cut, begin pulling the carpet away from the stairs, working your way from the top step down to the bottom. As you pull it off, roll the carpet up into manageable sections. Once fully removed, tape up the rolled carpet for easier disposal. Remember to check with your local municipality for proper disposal guidelines for old carpeting.
Goal: Begin by cutting the carpet at the top of the stairs and then systematically pull and roll it down each step for disposal.
What's used
Tools
- Heavy-Duty Tape
- Utility Knife
About the full video
This video provides a detailed guide on how to remove old carpeting, carpet padding, tack strips, staples, and any protruding nails from a wooden staircase. It covers the entire demolition and initial cleanup process to prepare the stairs for a new flooring installation.
Step 2 of 9: Peel Back Carpet
With the carpet scored, begin to carefully peel it back from the nosing of the stair tread, working your way down the riser. Try to pull it away in large sections if possible.
Every video in How to Remove Carpet Stair Treads Without Damaging the Finish
Step 1: Score and Cut Carpet Edges
- 0:15–0:39 Remove Stair Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:21–0:50 Remove the Carpet
Step 2: Peel Back Carpet
- 0:21–0:50 Remove the Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:15–0:39 Remove Stair Carpet (this video)
Step 3: Remove Carpet Padding
- 3:40–4:20 Remove Carpet Underpad
- 0:17–0:22 Remove Carpet Padding
- 0:09–0:13 Remove Carpet Padding
Step 4: Remove Staples and Fasteners
- 0:17–0:23 Remove Staples
- 0:38–0:57 Remove Tack Strips and Staples
- 1:00–1:25 Remove Carpet Pad
Step 5: Clean the Wood Treads
- 0:04–0:07 Clean the Staircase
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
Step 6: Inspect for Damage
Step 7: Repair Wood Damage
- 0:06–0:07 Repairing Surface Imperfections
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 0:09–0:16 Apply Wood Filler to Minor Damage
Step 8: Sand the Treads and Risers
- 0:37–0:41 Sand the Staircase
- 2:06–2:52 Sand Stair Treads and Risers
- 2:19–2:43 Sand and Final Clean
Step 9: Apply Finish (Optional)
- 1:07–1:13 Apply Protective Finish Sealer
- 2:11–2:16 Apply a Clear Protective Finish
- 3:59–4:37 Apply Protective Finish
How to Remove Carpet Stair Treads Without Damaging the Finish
A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

