Apply Wood Filler to Minor Damage
From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 7 of 9 · Video by A Ray of Sunlight

Showing 0:09–0:16 of the source video. Watch the full video with every moment.
What happens in this clip
Identify small chips, gouges, and minor imperfections on the wood surfaces. Take a tube of Elmer's Carpenter's Wood Filler (Golden Oak, Interior) and squeeze a small amount onto a toothpick. Carefully apply the wood filler into the damaged areas, ensuring it slightly overfills the imperfection. Use a finger to smooth the wood filler flush with the surrounding wood surface. For very small areas, a thin layer is sufficient. Allow the filler to dry according to the product instructions.
Goal: Address small chips, holes, and imperfections by applying wood filler directly into the damaged areas and smoothing it out.
What's used
Tools
- Elmer's Carpenter's Wood Filler (Golden Oak
- Interior)
- Toothpick
About the full video
This video provides a detailed guide on how to repair and refinish damaged wooden end tables. The process includes cleaning, filling cracks and chips with wood filler, re-securing loose wood with glue, adding decorative wood slats, priming the entire surface, and finally painting the tables to achieve a completely new and refreshed look.
Step 7 of 9: Repair Wood Damage
For minor imperfections, apply wood filler according to the product instructions. Once the filler has dried, sand it smooth to match the surrounding wood. For larger repairs, you may need to consider more substantial wood repair techniques or replacement pieces.
Every video in How to Remove Carpet Stair Treads Without Damaging the Finish
Step 1: Score and Cut Carpet Edges
- 0:15–0:39 Remove Stair Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:21–0:50 Remove the Carpet
Step 2: Peel Back Carpet
- 0:21–0:50 Remove the Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:15–0:39 Remove Stair Carpet
Step 3: Remove Carpet Padding
- 3:40–4:20 Remove Carpet Underpad
- 0:17–0:22 Remove Carpet Padding
- 0:09–0:13 Remove Carpet Padding
Step 4: Remove Staples and Fasteners
- 0:17–0:23 Remove Staples
- 0:38–0:57 Remove Tack Strips and Staples
- 1:00–1:25 Remove Carpet Pad
Step 5: Clean the Wood Treads
- 0:04–0:07 Clean the Staircase
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
Step 6: Inspect for Damage
Step 7: Repair Wood Damage
- 0:06–0:07 Repairing Surface Imperfections
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 0:09–0:16 Apply Wood Filler to Minor Damage (this video)
Step 8: Sand the Treads and Risers
- 0:37–0:41 Sand the Staircase
- 2:06–2:52 Sand Stair Treads and Risers
- 2:19–2:43 Sand and Final Clean
Step 9: Apply Finish (Optional)
- 1:07–1:13 Apply Protective Finish Sealer
- 2:11–2:16 Apply a Clear Protective Finish
- 3:59–4:37 Apply Protective Finish
How to Remove Carpet Stair Treads Without Damaging the Finish
A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

