Cut and Remove Main Carpet Sections
From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 2 of 9 · Video by HouseImprovements

Showing 0:58–3:40 of the source video. Watch the full video with every moment.
What happens in this clip
Using the utility knife, carefully cut the carpet along the back corner where the tread meets the riser. This creates an edge to grab onto. Once a cut is made, use pliers or hands (with gloves) to pull the carpet forcefully upwards and outwards. The carpet is typically held by tack strips along the edges. The goal is to detach the carpet from these strips on the treads and risers. Note that carpet on the side stringers (the angled board running along the side of the stairs) is usually a separate piece and should not interfere with removing the main tread/riser carpet.
Goal: Score and cut the carpet at the junction of the stair tread and riser, then pull the main carpet section free from the stairs.
What's used
Tools
- Pliers
- Utility Knife
- Work Gloves
About the full video
This video provides a detailed guide on how to safely and efficiently remove old carpet and its underlying components (underpad, tack strips, staples) from stairs. The process covers cutting and pulling off carpet, detaching underpad, and carefully removing all fasteners from the treads, risers, and stringers, preparing the stairs for new flooring installations.
Step 2 of 9: Peel Back Carpet
With the carpet scored, begin to carefully peel it back from the nosing of the stair tread, working your way down the riser. Try to pull it away in large sections if possible.
Every video in How to Remove Carpet Stair Treads Without Damaging the Finish
Step 1: Score and Cut Carpet Edges
- 0:15–0:39 Remove Stair Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:21–0:50 Remove the Carpet
Step 2: Peel Back Carpet
- 0:21–0:50 Remove the Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections (this video)
- 0:15–0:39 Remove Stair Carpet
Step 3: Remove Carpet Padding
- 3:40–4:20 Remove Carpet Underpad
- 0:17–0:22 Remove Carpet Padding
- 0:09–0:13 Remove Carpet Padding
Step 4: Remove Staples and Fasteners
- 0:17–0:23 Remove Staples
- 0:38–0:57 Remove Tack Strips and Staples
- 1:00–1:25 Remove Carpet Pad
Step 5: Clean the Wood Treads
- 0:04–0:07 Clean the Staircase
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
Step 6: Inspect for Damage
Step 7: Repair Wood Damage
- 0:06–0:07 Repairing Surface Imperfections
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 0:09–0:16 Apply Wood Filler to Minor Damage
Step 8: Sand the Treads and Risers
- 0:37–0:41 Sand the Staircase
- 2:06–2:52 Sand Stair Treads and Risers
- 2:19–2:43 Sand and Final Clean
Step 9: Apply Finish (Optional)
- 1:07–1:13 Apply Protective Finish Sealer
- 2:11–2:16 Apply a Clear Protective Finish
- 3:59–4:37 Apply Protective Finish
How to Remove Carpet Stair Treads Without Damaging the Finish
A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

