powered by

HOW TO STRIP AND SAND WOOD floors STAIRS handrails NO DUST dustless removal of old stain finish DIY

Video by Jones Knows · 1 moment used in Oak Valley Designs's DIY guides · 4:08 long

Moments in this video

  1. 2:19–2:43 Sand and Final Clean From How to Remove Carpet Stair Treads Without Damaging the Finish, Step 8: Sand the Treads and Risers

    Once the treads are completely dry, proceed with sanding. Start with a coarser grit sandpaper, such as 120-grit, attached to an orbital sander (a Dewalt sander is shown) to smooth out any remaining imperfections or rough spots on the wood. Then, switch to a finer grit, like 220-grit, for a final pass to achieve a perfectly smooth surface. The video emphasizes getting all corners, crevices, and any areas where stain or finish will be applied perfectly smooth. Use an orbital sander connected to a HEPA filter vacuum (a Festool Cleantec vacuum is shown) to efficiently collect sawdust and minimize airborne particles. After sanding, meticulously remove all remaining dust from the treads to ensure a clean surface for the new stain and finish.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

HOW TO STRIP AND SAND WOOD floors STAIRS handrails NO DUST dustless removal of old stain finish DIY — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.