Cut and Remove Main Carpet Sections
From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 1 of 9 · Video by HouseImprovements

Showing 0:58–3:40 of the source video. Watch the full video with every moment.
What happens in this clip
Using the utility knife, carefully cut the carpet along the back corner where the tread meets the riser. This creates an edge to grab onto. Once a cut is made, use pliers or hands (with gloves) to pull the carpet forcefully upwards and outwards. The carpet is typically held by tack strips along the edges. The goal is to detach the carpet from these strips on the treads and risers. Note that carpet on the side stringers (the angled board running along the side of the stairs) is usually a separate piece and should not interfere with removing the main tread/riser carpet.
Goal: Score and cut the carpet at the junction of the stair tread and riser, then pull the main carpet section free from the stairs.
What's used
Tools
- Pliers
- Utility Knife
- Work Gloves
About the full video
This video provides a detailed guide on how to safely and efficiently remove old carpet and its underlying components (underpad, tack strips, staples) from stairs. The process covers cutting and pulling off carpet, detaching underpad, and carefully removing all fasteners from the treads, risers, and stringers, preparing the stairs for new flooring installations.
What's said in this clip
use those yet so we're gonna start out here by removing the carpet off the actual stair treads and risers and if you just kind of feel back in this corner you can start either up there down here but I'm gonna start down here just feel if there's a joint because sometimes there might already be a cut there but if there isn't just take your knife and cut it so we have some place to kind of get a hold of the carpet and start with I'm just cutting right back in that corner like so and then usually it's hard to get a hold of it and pull it off but if you have a pair of pliers you can usually grab ahold of the carpet get it pulled back enough to get your hand in there well I didn't get a quick cut through here there we go so you can see as it pulls off they they basically just took a strip of carpet and wrapped it all the way around up the stairs any carpet that you might have on the sides is going to be separate from this piece so once you get a hold of this just watch for staples like you can see the staple here staples around the perimeter so you don't jam it in your hands this might be where you want the gloves but once you get it kind of started it's just a matter of forcefully pulling it loose whatever direction you need to to get it off so you can see these staples they were all stapled up underneath the and those are the tread there okay I don't bump the camera if I do sorry okay so it's coming off fairly relatively easy now I just bump the camera maybe what I'll do I'll just cut this off so we don't have to move you get the idea how well that's gonna come off once you get it started just cut this out of the way okay so in most cases you could start top or bottom and I think it's easier to start at the top myself just peel off as much as you want to whether it's the whole set of stairs or whatever and get it out of the way so
Automatically transcribed from the source video.
Step 1 of 9: Score and Cut Carpet Edges
Using a sharp utility knife, score the carpet where it meets the riser and the nosing of each stair tread. This initial cut helps to create a clean line and makes it easier to peel back the carpet without tearing it excessively.
Every video in How to Remove Carpet Stair Treads Without Damaging the Finish
Step 1: Score and Cut Carpet Edges
- 0:15–0:39 Remove Stair Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections (this video)
- 0:21–0:50 Remove the Carpet
Step 2: Peel Back Carpet
- 0:21–0:50 Remove the Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:15–0:39 Remove Stair Carpet
Step 3: Remove Carpet Padding
- 3:40–4:20 Remove Carpet Underpad
- 0:17–0:22 Remove Carpet Padding
- 0:09–0:13 Remove Carpet Padding
Step 4: Remove Staples and Fasteners
- 0:17–0:23 Remove Staples
- 0:38–0:57 Remove Tack Strips and Staples
- 1:00–1:25 Remove Carpet Pad
Step 5: Clean the Wood Treads
- 0:04–0:07 Clean the Staircase
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
Step 6: Inspect for Damage
Step 7: Repair Wood Damage
- 0:06–0:07 Repairing Surface Imperfections
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 0:09–0:16 Apply Wood Filler to Minor Damage
Step 8: Sand the Treads and Risers
- 0:37–0:41 Sand the Staircase
- 2:06–2:52 Sand Stair Treads and Risers
- 2:19–2:43 Sand and Final Clean
Step 9: Apply Finish (Optional)
- 1:07–1:13 Apply Protective Finish Sealer
- 2:11–2:16 Apply a Clear Protective Finish
- 3:59–4:37 Apply Protective Finish
Questions about How to Remove Carpet Stair Treads Without Damaging the Finish
What are the essential tools I'll need to remove carpet stair treads without damaging the wood?
You'll definitely need a sturdy staple puller, pliers, and a carpet knife for cutting. A plastic putty knife is crucial for gently prying up carpet and padding without scratching the wood. Don't forget a shop vacuum for efficient cleanup of debris and staples.
What safety precautions should I take when working on stairs?
Always ensure good lighting, using a flashlight if needed, and keep the stairs clear of tools and debris to prevent trips. Wear sturdy gloves to protect your hands from sharp staples and carpet edges. Consider knee pads for comfort during prolonged kneeling.
Is removing carpet from stairs a difficult DIY project, and how long should I expect it to take?
This project is generally considered beginner-friendly, but it requires patience and attention to detail. While the estimated time is around 8 hours, it can vary based on the number of stairs and how well the carpet and padding are adhered. Take your time to avoid damaging the underlying wood.
How can I prevent damaging the wood finish underneath while removing the carpet and fasteners?
Use a plastic putty knife to gently pry up the carpet and padding, avoiding direct contact with metal tools on the wood. When removing staples, use a staple puller or pliers carefully, pulling them straight out rather than prying against the wood surface. Work slowly and deliberately to minimize scratches.
What's the best way to deal with stubborn staples or old adhesive residue on the wood?
For stubborn staples, use needle-nose pliers to grip and wiggle them out. For adhesive, apply a specialized adhesive remover like Henry Easy Release, following the product instructions carefully. Allow it to work, then gently scrape with a plastic scraper and wipe clean with microfiber cloths.
After removing the carpet, do I have to sand and refinish the wood treads, or can I just clean them?
While thorough cleaning is essential, sanding and refinishing are optional but highly recommended for the best results. If the wood is in good condition and you like its natural look, a deep clean and a protective sealer might suffice. However, refinishing allows you to repair damage, achieve a uniform look, and provide long-lasting protection.
How to Remove Carpet Stair Treads Without Damaging the Finish
A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

