Apply Protective Finish
From How to Remove Carpet Stair Treads Without Damaging the Finish · Step 9 of 9 · Video by Matthew Peech

Showing 3:59–4:37 of the source video. Watch the full video with every moment.
What happens in this clip
To protect the wood and further enhance its appearance, apply a clear protective finish. The creator uses Minwax Fast-Drying Polyurethane in Clear Satin, an oil-based finish. Apply the polyurethane evenly with a brush over all surfaces of the stained wood. This will seal the wood, provide durability, and add a subtle sheen that brings out the depth of the distressing and the richness of the stain. Allow adequate drying time between coats and before handling.
Goal: Protect and seal the wood
What's used
Tools
- Paintbrush
- Wood
- Fir
- ready for finish.
Materials
- Minwax Fast-Drying Polyurethane (Clear Satin) Minwax
- Clear varnish
About the full video
This project demonstrates how to transform standard, inexpensive white pine into aged, hand-hewn timber, suitable for rustic DIY projects like floating shelves. The process involves mechanical distressing, simulating age cracks and wormholes, followed by staining and finishing to enhance the antique look.
Step 9 of 9: Apply Finish (Optional)
Depending on your desired look and the type of wood, apply your chosen finish. This could be a wood stain, a clear sealant (like polyurethane), or paint. Follow the manufacturer's instructions for application and drying times. Multiple coats may be necessary for durability.
Every video in How to Remove Carpet Stair Treads Without Damaging the Finish
Step 1: Score and Cut Carpet Edges
- 0:15–0:39 Remove Stair Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:21–0:50 Remove the Carpet
Step 2: Peel Back Carpet
- 0:21–0:50 Remove the Carpet
- 0:58–3:40 Cut and Remove Main Carpet Sections
- 0:15–0:39 Remove Stair Carpet
Step 3: Remove Carpet Padding
- 3:40–4:20 Remove Carpet Underpad
- 0:17–0:22 Remove Carpet Padding
- 0:09–0:13 Remove Carpet Padding
Step 4: Remove Staples and Fasteners
- 0:17–0:23 Remove Staples
- 0:38–0:57 Remove Tack Strips and Staples
- 1:00–1:25 Remove Carpet Pad
Step 5: Clean the Wood Treads
- 0:04–0:07 Clean the Staircase
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
Step 6: Inspect for Damage
Step 7: Repair Wood Damage
- 0:06–0:07 Repairing Surface Imperfections
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 0:09–0:16 Apply Wood Filler to Minor Damage
Step 8: Sand the Treads and Risers
- 0:37–0:41 Sand the Staircase
- 2:06–2:52 Sand Stair Treads and Risers
- 2:19–2:43 Sand and Final Clean
Step 9: Apply Finish (Optional)
- 1:07–1:13 Apply Protective Finish Sealer
- 2:11–2:16 Apply a Clear Protective Finish
- 3:59–4:37 Apply Protective Finish (this video)
How to Remove Carpet Stair Treads Without Damaging the Finish
A high-level outline for removing carpeted stair treads while preserving the underlying wood finish. This involves carefully detaching the carpet, padding, and any fasteners, then cleaning and potentially refinishing the exposed treads.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

