Test Gate Security and Latch
From How to Install a Pet Gate at the Bottom of Stairs · Step 5 of 5 · Video by FairyBaby

Showing 0:09–0:15 of the source video. Watch the full video with every moment.
What happens in this clip
Once the gate is fully installed and tightened, thoroughly test its stability by gently pushing, pulling, and shaking the entire frame to confirm it does not move or shift. Operate the gate's latch and opening mechanism several times to ensure it functions correctly and securely, as demonstrated by the woman opening the gate (0:09-0:10) and the cat attempting to pass through but being contained (0:12-0:15). This final verification ensures the gate effectively contains pets or children, providing peace of mind.
Goal: Perform final checks to ensure the gate is stable, the latch functions correctly, and it effectively prevents passage.
What's used
Tools
- Installed Pet Gate
About the full video
This video demonstrates the quick and easy installation of a pressure-mounted pet gate, specifically a Fairybaby "Narrow Spacing Gate," in a stairwell opening. The process involves positioning the gate, adjusting the pressure bolts to secure it, and testing the latch mechanism for pet containment.
Step 5 of 5: Adjust and Test Latch Mechanism
Once the gate is hung, make any necessary minor adjustments to ensure it sits perfectly square and closes flush against the frame or post. Operate the latch several times to ensure it is easy to use for adults but secure enough to contain pets and small children. Gently push and pull on the gate to confirm it is stable and securely attached to the mounting hardware. There should be minimal movement or play. Re-check that the latch engages fully and holds the gate closed effectively.
Every video in How to Install a Pet Gate at the Bottom of Stairs
Step 1: Select Gate Type and Location
- 0:04–0:43 Prepare and Plan for Gate Installation
- 10:22–10:55 Select and Position the Gate
- 1:29–1:43 Plan Hardware Mount Hinge Direction
Step 2: Mark Mounting Positions
- 1:11–1:29 Mark and Install Bottom Wall Brackets
- 0:24–0:31 Install Lower Wall Mounts (First Side)
- 0:56–1:10 Install Lower Wall Mounts (Second Side)
Step 3: Install Mounting Hardware
- 11:05–11:15 Drill Pilot Holes and Install Anchors
- 1:16–2:13 Install Gate (Hardware Mounting)
- 1:18–1:38 Install Left Gate Mounts
Step 4: Attach Gate to Hardware
- 5:13–5:39 Install Gate onto Wall Fittings
- 11:15–11:22 Mount and Adjust the Gate
- 5:29–6:07 Install Gate to Staircase
Step 5: Adjust and Test Latch Mechanism
- 0:09–0:15 Test Gate Security and Latch (this video)
- 11:15–11:22 Mount and Adjust the Gate
- 0:04–0:07 Test and Fine-Tune the Latch Mechanism
How to Install a Pet Gate at the Bottom of Stairs
Outline for installing a pet gate at the bottom of stairs, focusing on secure mounting and ensuring safety for pets and children.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

