Install Gate to Staircase
From How to Install a Pet Gate at the Bottom of Stairs · Step 4 of 5 · Video by DIYTyler

Showing 5:29–6:07 of the source video. Watch the full video with every moment.
What happens in this clip
Align the hinge and latch mounting pieces onto the wall and the newel post at the desired height. Secure these pieces directly into the wall studs and the newel post using a drill/driver and appropriate screws. Ensure these mounts are not glued, allowing for easy removal if needed. Attach the gate onto the installed hinges, making sure it swings freely. Then, using the gate itself as a guide, mark the precise location for the latch mechanism on the newel post. Pre-drill and secure the latch components to the newel post with screws, ensuring a secure closure. Finally, check the gate's movement and latch functionality.
What's used
Tools
- Drill/Driver Ridgid
- Level
- Marker
- Screws
About the full video
This video details the construction and installation of a custom rotating baby safety gate, designed with a parallelogram mechanism and pivot hinges for dynamic spaces. The project involves cutting and shaping ash wood, drilling precise holes for dowels and slots, sanding, finishing with stain, Danish oil, and polyurethane, and finally assembling and installing the gate onto a staircase newel post and wall.
Step 4 of 5: Attach Gate to Hardware
Carefully lift the gate and align its corresponding attachment points (e.g., hinge slots, latch mechanisms) with the previously installed wall brackets or posts. Follow the specific instructions provided with your gate model for attaching it. This may involve sliding pins, clicking latches into place, or screwing the gate frame to hinges. Once attached, test the gate by opening and closing it to ensure it moves smoothly without binding. Verify that the latch engages securely and can be easily operated by an adult but is difficult for pets or young children to open.
Every video in How to Install a Pet Gate at the Bottom of Stairs
Step 1: Select Gate Type and Location
- 0:04–0:43 Prepare and Plan for Gate Installation
- 10:22–10:55 Select and Position the Gate
- 1:29–1:43 Plan Hardware Mount Hinge Direction
Step 2: Mark Mounting Positions
- 1:11–1:29 Mark and Install Bottom Wall Brackets
- 0:24–0:31 Install Lower Wall Mounts (First Side)
- 0:56–1:10 Install Lower Wall Mounts (Second Side)
Step 3: Install Mounting Hardware
- 11:05–11:15 Drill Pilot Holes and Install Anchors
- 1:16–2:13 Install Gate (Hardware Mounting)
- 1:18–1:38 Install Left Gate Mounts
Step 4: Attach Gate to Hardware
- 5:13–5:39 Install Gate onto Wall Fittings
- 11:15–11:22 Mount and Adjust the Gate
- 5:29–6:07 Install Gate to Staircase (this video)
Step 5: Adjust and Test Latch Mechanism
- 0:09–0:15 Test Gate Security and Latch
- 11:15–11:22 Mount and Adjust the Gate
- 0:04–0:07 Test and Fine-Tune the Latch Mechanism
How to Install a Pet Gate at the Bottom of Stairs
Outline for installing a pet gate at the bottom of stairs, focusing on secure mounting and ensuring safety for pets and children.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

