Install Lower Wall Mounts (Second Side)
From How to Install a Pet Gate at the Bottom of Stairs · Step 2 of 5 · Video by Pauls Workshop

Showing 0:56–1:10 of the source video. Watch the full video with every moment.
What happens in this clip
With one side of the gate fully mounted, the installer temporarily detaches the gate to gain clear access to the opposite side of the stairway opening. He then measures and marks the positions for the lower wall mounts on this second side. Using the cordless drill, he pre-drills the holes and securely fastens these lower mounts with screws, mirroring the placement of the first side.
Goal: Secure the lower wall mounts for the gate's second side
What's used
Tools
- Cordless Drill Milwaukee
- Manual screwdriver
- Drill Bit Unspecified
- Pencil/Marker Unspecified
- Screwdriver Bit Unspecified
- Screws Unspecified
- Tape Measure Unspecified
- Wall Mounts (plastic) Unspecified
About the full video
This project provides a step-by-step guide on how to install a configurable plastic safety gate at the top of a steep carpeted stairway. The process involves marking and securely attaching wall mounts, assembling the gate panels, and finally securing the gate to these mounts to prevent access to the stairs.
Step 2 of 5: Mark Mounting Positions
Place the pet gate in the desired position at the bottom of the stairs. Use a spirit level to ensure the gate is perfectly vertical and horizontal. If mounting to a wall, identify the studs for the most secure installation. If mounting to banister posts, ensure they are sturdy and capable of supporting the gate. Carefully mark the precise locations where the mounting brackets or hinges will be attached to the wall or post. Double-check these marks for accuracy and ensure they are level and plumb.
Every video in How to Install a Pet Gate at the Bottom of Stairs
Step 1: Select Gate Type and Location
- 0:04–0:43 Prepare and Plan for Gate Installation
- 10:22–10:55 Select and Position the Gate
- 1:29–1:43 Plan Hardware Mount Hinge Direction
Step 2: Mark Mounting Positions
- 1:11–1:29 Mark and Install Bottom Wall Brackets
- 0:24–0:31 Install Lower Wall Mounts (First Side)
- 0:56–1:10 Install Lower Wall Mounts (Second Side) (this video)
Step 3: Install Mounting Hardware
- 11:05–11:15 Drill Pilot Holes and Install Anchors
- 1:16–2:13 Install Gate (Hardware Mounting)
- 1:18–1:38 Install Left Gate Mounts
Step 4: Attach Gate to Hardware
- 5:13–5:39 Install Gate onto Wall Fittings
- 11:15–11:22 Mount and Adjust the Gate
- 5:29–6:07 Install Gate to Staircase
Step 5: Adjust and Test Latch Mechanism
- 0:09–0:15 Test Gate Security and Latch
- 11:15–11:22 Mount and Adjust the Gate
- 0:04–0:07 Test and Fine-Tune the Latch Mechanism
How to Install a Pet Gate at the Bottom of Stairs
Outline for installing a pet gate at the bottom of stairs, focusing on secure mounting and ensuring safety for pets and children.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

