Mount and Adjust the Gate
From How to Install a Pet Gate at the Bottom of Stairs · Step 4 of 5 · Video by Lone Fox

Showing 11:15–11:22 of the source video. Watch the full video with every moment.
What happens in this clip
Position the gate's mounting hardware over the drilled holes or wall anchors. Use the provided screws to securely fasten the hardware to the wall. For gates that 'tighten into the doorway', turn the adjustment screws or knobs until the gate is firmly wedged and stable within the opening. Test the gate by pushing and pulling on it to ensure it does not budge. Check that the latch mechanism opens and closes smoothly and securely. Adjust as necessary to create a safe barrier for your puppy.
Goal: Attach the gate's mounting brackets or hardware to the installed anchors or directly into the studs, and then securely fasten the gate. Adjust the gate's tension or position to ensure it is stable and functions correctly.
What's used
Tools
- Screwdriver
About the full video
This project guides you through securely installing a puppy gate (also known as an exercise pen or baby gate) within a doorway using hardware mounting, including wall anchors for stability. This is essential for puppy-proofing your home, especially to restrict access to stairs or specific rooms. The video highlights how these gates can seamlessly integrate with home decor while providing crucial safety for your pet.
Step 4 of 5: Attach Gate to Hardware
Carefully lift the gate and align its corresponding attachment points (e.g., hinge slots, latch mechanisms) with the previously installed wall brackets or posts. Follow the specific instructions provided with your gate model for attaching it. This may involve sliding pins, clicking latches into place, or screwing the gate frame to hinges. Once attached, test the gate by opening and closing it to ensure it moves smoothly without binding. Verify that the latch engages securely and can be easily operated by an adult but is difficult for pets or young children to open.
Every video in How to Install a Pet Gate at the Bottom of Stairs
Step 1: Select Gate Type and Location
- 0:04–0:43 Prepare and Plan for Gate Installation
- 10:22–10:55 Select and Position the Gate
- 1:29–1:43 Plan Hardware Mount Hinge Direction
Step 2: Mark Mounting Positions
- 1:11–1:29 Mark and Install Bottom Wall Brackets
- 0:24–0:31 Install Lower Wall Mounts (First Side)
- 0:56–1:10 Install Lower Wall Mounts (Second Side)
Step 3: Install Mounting Hardware
- 11:05–11:15 Drill Pilot Holes and Install Anchors
- 1:16–2:13 Install Gate (Hardware Mounting)
- 1:18–1:38 Install Left Gate Mounts
Step 4: Attach Gate to Hardware
- 5:13–5:39 Install Gate onto Wall Fittings
- 11:15–11:22 Mount and Adjust the Gate (this video)
- 5:29–6:07 Install Gate to Staircase
Step 5: Adjust and Test Latch Mechanism
- 0:09–0:15 Test Gate Security and Latch
- 11:15–11:22 Mount and Adjust the Gate
- 0:04–0:07 Test and Fine-Tune the Latch Mechanism
How to Install a Pet Gate at the Bottom of Stairs
Outline for installing a pet gate at the bottom of stairs, focusing on secure mounting and ensuring safety for pets and children.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

