Plan Hardware Mount Hinge Direction
From How to Install a Pet Gate at the Bottom of Stairs · Step 1 of 5 · Video by North States Industries

Showing 1:29–1:43 of the source video. Watch the full video with every moment.
What happens in this clip
When installing the Petgate at the top of stairs, hardware mounting is crucial for safety. First, identify which side of the opening you want the gate to hinge. The selection of the hinge side will determine the swing direction of the gate. Critically, ensure that the gate is mounted so it always swings over the landing, never over the stairs, to prevent accidental falls. Refer to the installation diagram provided for precise measurements.
Goal: Determine the safe swing direction for a hardware-mounted gate at the top of stairs
What's used
Tools
- North States Petgate North States
About the full video
This video provides a detailed installation guide for a North States Petgate, demonstrating two primary mounting methods: pressure mounting and hardware mounting. It covers how to unpack the gate, use the pressure mounting mechanism for quick setup in doorways, and how to utilize door sockets for increased stability. For mounting at the top of stairs, the video illustrates the hardware mounting process, including attaching hinges and ensuring safe swing direction, along with general safety precautions for installation when children are present.
Step 1 of 5: Select Gate Type and Location
Select a pet gate that is specifically designed for use at the bottom of stairs. Hardware-mounted gates are generally recommended for stairways for maximum safety, as pressure-mounted gates can pose a risk if dislodged. Measure the width of the stair opening at the bottom to ensure the chosen gate will fit snugly. Check the gate's specifications for maximum and minimum opening widths it can accommodate. Prioritize gates that meet current safety standards for child and pet safety. Ensure the gate itself is sturdy and does not have small parts that could be a choking hazard for young children or pets.
Every video in How to Install a Pet Gate at the Bottom of Stairs
Step 1: Select Gate Type and Location
- 0:04–0:43 Prepare and Plan for Gate Installation
- 10:22–10:55 Select and Position the Gate
- 1:29–1:43 Plan Hardware Mount Hinge Direction (this video)
Step 2: Mark Mounting Positions
- 1:11–1:29 Mark and Install Bottom Wall Brackets
- 0:24–0:31 Install Lower Wall Mounts (First Side)
- 0:56–1:10 Install Lower Wall Mounts (Second Side)
Step 3: Install Mounting Hardware
- 11:05–11:15 Drill Pilot Holes and Install Anchors
- 1:16–2:13 Install Gate (Hardware Mounting)
- 1:18–1:38 Install Left Gate Mounts
Step 4: Attach Gate to Hardware
- 5:13–5:39 Install Gate onto Wall Fittings
- 11:15–11:22 Mount and Adjust the Gate
- 5:29–6:07 Install Gate to Staircase
Step 5: Adjust and Test Latch Mechanism
- 0:09–0:15 Test Gate Security and Latch
- 11:15–11:22 Mount and Adjust the Gate
- 0:04–0:07 Test and Fine-Tune the Latch Mechanism
How to Install a Pet Gate at the Bottom of Stairs
Outline for installing a pet gate at the bottom of stairs, focusing on secure mounting and ensuring safety for pets and children.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

