Mark and Install Bottom Wall Brackets
From How to Install a Pet Gate at the Bottom of Stairs · Step 2 of 5 · Video by Savic - manufacturer of pet products

Showing 1:11–1:29 of the source video. Watch the full video with every moment.
What happens in this clip
With the gate's width set and internal lock pins tightened, place the gate in the doorway. Use a pencil to mark the precise locations on both sides of the opening for the lower wall brackets, aligning them with the bottom adjustable tension bolts of the gate. Use a spirit level to ensure these marks are perfectly horizontal. Securely screw the lower wall brackets into the wall using a screwdriver. The video demonstrates holding the bracket against the wall and driving screws into its designated holes.
Goal: Securely mount the lower wall brackets as a stable base for the gate.
What's used
Tools
- Bottom Wall Brackets Savic
- Dog Barrier Gate Savic
- Level Unspecified
- Laser level
- Pencil Unspecified
- Screwdriver (Phillips head) Unspecified
- Screws (for wall brackets) Savic
About the full video
This project provides detailed assembly instructions for a Savic dog barrier gate, designed for both indoor and outdoor use. The process guides users through unpacking and verifying components, measuring the installation opening, assembling and setting the gate's width, installing wall-mounted brackets, and finally mounting and fine-tuning the gate for secure and reliable operation.
Step 2 of 5: Mark Mounting Positions
Place the pet gate in the desired position at the bottom of the stairs. Use a spirit level to ensure the gate is perfectly vertical and horizontal. If mounting to a wall, identify the studs for the most secure installation. If mounting to banister posts, ensure they are sturdy and capable of supporting the gate. Carefully mark the precise locations where the mounting brackets or hinges will be attached to the wall or post. Double-check these marks for accuracy and ensure they are level and plumb.
Every video in How to Install a Pet Gate at the Bottom of Stairs
Step 1: Select Gate Type and Location
- 0:04–0:43 Prepare and Plan for Gate Installation
- 10:22–10:55 Select and Position the Gate
- 1:29–1:43 Plan Hardware Mount Hinge Direction
Step 2: Mark Mounting Positions
- 1:11–1:29 Mark and Install Bottom Wall Brackets (this video)
- 0:24–0:31 Install Lower Wall Mounts (First Side)
- 0:56–1:10 Install Lower Wall Mounts (Second Side)
Step 3: Install Mounting Hardware
- 11:05–11:15 Drill Pilot Holes and Install Anchors
- 1:16–2:13 Install Gate (Hardware Mounting)
- 1:18–1:38 Install Left Gate Mounts
Step 4: Attach Gate to Hardware
- 5:13–5:39 Install Gate onto Wall Fittings
- 11:15–11:22 Mount and Adjust the Gate
- 5:29–6:07 Install Gate to Staircase
Step 5: Adjust and Test Latch Mechanism
- 0:09–0:15 Test Gate Security and Latch
- 11:15–11:22 Mount and Adjust the Gate
- 0:04–0:07 Test and Fine-Tune the Latch Mechanism
How to Install a Pet Gate at the Bottom of Stairs
Outline for installing a pet gate at the bottom of stairs, focusing on secure mounting and ensuring safety for pets and children.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

