Drill Pilot Holes and Install Anchors
From How to Install a Pet Gate at the Bottom of Stairs · Step 3 of 5 · Video by Lone Fox

Showing 11:05–11:15 of the source video. Watch the full video with every moment.
What happens in this clip
Select a drill bit slightly smaller than your mounting screws for pilot holes, or according to your wall anchor's instructions. Carefully drill pilot holes at each marked location. If you are drilling into a wall that does not have a stud, insert a suitable wall anchor (e.g., toggle bolt, self-drilling anchor, expansion anchor) into each pilot hole. Ensure the anchors are flush with the wall surface and provide a sturdy base for the gate's mounting hardware. The video implies that the gates can be tightened, which usually involves a tension rod or direct screwing into the wall or frame.
Goal: Drill pilot holes at the marked locations. If mounting into drywall without a stud, insert appropriate wall anchors into the pilot holes to provide a secure base for the mounting screws.
What's used
Tools
- Drill Bits
- Power Drill
- Wall Anchors
About the full video
This project guides you through securely installing a puppy gate (also known as an exercise pen or baby gate) within a doorway using hardware mounting, including wall anchors for stability. This is essential for puppy-proofing your home, especially to restrict access to stairs or specific rooms. The video highlights how these gates can seamlessly integrate with home decor while providing crucial safety for your pet.
Step 3 of 5: Install Mounting Hardware
Following the gate manufacturer's instructions, drill pilot holes at each marked location. The size of the pilot hole should be slightly smaller than the diameter of the screws provided. If mounting to a stud, ensure the screw penetrates well into the stud. If using drywall anchors, install them according to their specific instructions. Once pilot holes are drilled (and anchors installed if needed), align the mounting brackets or hinges with the holes and drive the screws firmly to secure them to the surface. Ensure all hardware is tightly fastened.
Every video in How to Install a Pet Gate at the Bottom of Stairs
Step 1: Select Gate Type and Location
- 0:04–0:43 Prepare and Plan for Gate Installation
- 10:22–10:55 Select and Position the Gate
- 1:29–1:43 Plan Hardware Mount Hinge Direction
Step 2: Mark Mounting Positions
- 1:11–1:29 Mark and Install Bottom Wall Brackets
- 0:24–0:31 Install Lower Wall Mounts (First Side)
- 0:56–1:10 Install Lower Wall Mounts (Second Side)
Step 3: Install Mounting Hardware
- 11:05–11:15 Drill Pilot Holes and Install Anchors (this video)
- 1:16–2:13 Install Gate (Hardware Mounting)
- 1:18–1:38 Install Left Gate Mounts
Step 4: Attach Gate to Hardware
- 5:13–5:39 Install Gate onto Wall Fittings
- 11:15–11:22 Mount and Adjust the Gate
- 5:29–6:07 Install Gate to Staircase
Step 5: Adjust and Test Latch Mechanism
- 0:09–0:15 Test Gate Security and Latch
- 11:15–11:22 Mount and Adjust the Gate
- 0:04–0:07 Test and Fine-Tune the Latch Mechanism
How to Install a Pet Gate at the Bottom of Stairs
Outline for installing a pet gate at the bottom of stairs, focusing on secure mounting and ensuring safety for pets and children.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

