powered by

Install Gate (Hardware Mounting)

From How to Install a Pet Gate at the Bottom of Stairs · Step 3 of 5 · Video by North States Industries

Showing 1:16–2:13 of the source video. Watch the full video with every moment.

What happens in this clip

For a permanent, swinging gate installation, use hardware mounting. First, decide on the desired swing direction, as this will determine the placement of the hinge brackets. Using a tape measure and pencil, mark the precise installation points for the bottom hinge bracket on the wall (refer to the instruction manual for specific measurements, often 3 3/4 to 4 inches from the floor). Secure this bracket to the wall with screws using a screwdriver. Next, measure approximately 20 inches (51.3 cm) directly above the bottom hinge bracket and mark the position for the top hinge bracket. Install the top hinge bracket securely with screws. Once both hinge brackets are in place, align the gate's hinge pins with these installed brackets and slide the gate downwards, seating it firmly onto the hinges. On the opposite side of the opening, with the gate closed, measure and mark the positions for the bottom and top latching brackets, ensuring they align perfectly with the gate's latching mechanism. Finally, attach these latching brackets to the wall with screws.

Goal: Securely install a permanent, swinging gate using wall-mounted hardware.

What's used

Tools

  • Hinge Brackets North States
  • Latching Brackets North States
  • Level
  • Measuring Tape
  • Pencil
  • Screwdriver
  • Screws North States
  • Supergate Classic Baby Gate North States

About the full video

This project provides a comprehensive guide on how to install the North States Supergate Classic baby gate using both pressure mounting and hardware mounting methods. It details the steps for unpacking, setting up pressure-mounted configurations, enhancing security with door sockets, and performing a more permanent hardware-mounted installation, along with crucial safety advice.

What's said in this clip

at equal distances from the edge of the opening if desired screws can be inserted for additional stability the super gate should be Hardware mounted for additional safety at the top of stairs or where attachment to wood or metal surfaces are possible ensure the gate swings over the landing never over the stairs identify which side you want the gate to hinge it will swing in the direction of the hole selected slide the lower gate hinge onto the hinge side as shown screwing it on to the gate following the provided installation diagram screw the two casement hinges into the hinge side of the opening place the bottom gate hinge onto the lower casement hinge selecting the appropriate mounting hole to accommodate the desired swing direction then slide the top gate hinge into position with the casing hinge screwing it into the gate on the opposite side of the opening follow the instructions for pressure

Automatically transcribed from the source video.

Step 3 of 5: Install Mounting Hardware

Following the gate manufacturer's instructions, drill pilot holes at each marked location. The size of the pilot hole should be slightly smaller than the diameter of the screws provided. If mounting to a stud, ensure the screw penetrates well into the stud. If using drywall anchors, install them according to their specific instructions. Once pilot holes are drilled (and anchors installed if needed), align the mounting brackets or hinges with the holes and drive the screws firmly to secure them to the surface. Ensure all hardware is tightly fastened.

Open this step in the guide

Every video in How to Install a Pet Gate at the Bottom of Stairs

  1. Step 1: Select Gate Type and Location

  2. Step 2: Mark Mounting Positions

  3. Step 3: Install Mounting Hardware

  4. Step 4: Attach Gate to Hardware

  5. Step 5: Adjust and Test Latch Mechanism

Questions about How to Install a Pet Gate at the Bottom of Stairs

What kind of pet gate is best for the bottom of stairs, especially if it also needs to be safe for children?

For stair applications, always choose a hardware-mounted gate, as pressure-mounted gates are not secure enough and can pose a fall risk. Look for gates that specify they meet ASTM safety standards (like the Regalo or Safety 1st models) if children will also be using them. These gates offer superior stability and security.

What should I do if I can't find a stud exactly where I need to mount the gate hardware?

While mounting into a stud provides the strongest attachment, you can use heavy-duty drywall anchors, such as the E-Z Ancor toggles mentioned, in plaster or drywall. Ensure these anchors are rated for significant pull-out force. Always test the security of the installed hardware vigorously before attaching the gate.

How can I ensure the gate is installed perfectly level, and the latch mechanism works smoothly?

Use a level to accurately mark all your mounting positions before drilling, especially for the top and bottom brackets on both sides. Once the gate is attached, carefully adjust any hinge tension screws and check the alignment of the latch strike plate. A properly installed gate should swing freely and latch securely with minimal effort.

What are the most common mistakes beginners make when installing a pet gate at the bottom of stairs?

A frequent mistake is not ensuring secure mounting by either missing a stud or using inadequate anchors, which can compromise safety. Another common error is not thoroughly testing the latch mechanism and overall stability after installation. Always double-check all connections and confirm the gate can withstand reasonable force.

Do I need any specialized tools for this project, or will basic household tools suffice?

A stud finder (like the DEWALT DW0150) is strongly recommended to locate studs for the most secure mounting, which is crucial for stair gates. While a drill, drill bits, and a screwdriver are common, ensure you have the correct bit sizes for the gate's mounting hardware. These tools help ensure precise and safe installation.

How can I install a gate if I don't want to drill directly into my wooden banister or baseboards?

For banisters, consider using banister mounting kits that secure the gate with straps or clamps without drilling into the wood. If your baseboards interfere, you might need to use wood shims or spacers behind the mounting brackets to ensure the gate hangs plumb and clears any trim. Always verify that such alternative mounting methods remain structurally sound.

How to Install a Pet Gate at the Bottom of Stairs

Outline for installing a pet gate at the bottom of stairs, focusing on secure mounting and ensuring safety for pets and children.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install Gate (Hardware Mounting) — How to Install a Pet Gate at the Bottom of Stairs | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.