Install Lower Wall Mounts (First Side)
From How to Install a Pet Gate at the Bottom of Stairs · Step 2 of 5 · Video by Pauls Workshop

Showing 0:24–0:31 of the source video. Watch the full video with every moment.
What happens in this clip
The installer begins by marking the desired position for the lower wall mounts on one side of the stairway opening. He then uses a cordless drill to create pilot holes in the wall or baseboard. Following this, he securely attaches the plastic wall mounts using screws, ensuring they are firmly in place. These mounts will serve as the anchor points for the gate.
Goal: Secure the lower wall mounts for the gate's first side
What's used
Tools
- Cordless Drill Milwaukee
- Manual screwdriver (for screws only)
- Drill Bit Unspecified
- Pencil/Marker Unspecified
- Screwdriver Bit Unspecified
- Screws Unspecified
- Wall Mounts (plastic) Unspecified
About the full video
This project provides a step-by-step guide on how to install a configurable plastic safety gate at the top of a steep carpeted stairway. The process involves marking and securely attaching wall mounts, assembling the gate panels, and finally securing the gate to these mounts to prevent access to the stairs.
What's said in this clip
never installed them before so I'm just reading the instructions get all my tools and ready to go
Automatically transcribed from the source video.
Step 2 of 5: Mark Mounting Positions
Place the pet gate in the desired position at the bottom of the stairs. Use a spirit level to ensure the gate is perfectly vertical and horizontal. If mounting to a wall, identify the studs for the most secure installation. If mounting to banister posts, ensure they are sturdy and capable of supporting the gate. Carefully mark the precise locations where the mounting brackets or hinges will be attached to the wall or post. Double-check these marks for accuracy and ensure they are level and plumb.
Every video in How to Install a Pet Gate at the Bottom of Stairs
Step 1: Select Gate Type and Location
- 0:04–0:43 Prepare and Plan for Gate Installation
- 10:22–10:55 Select and Position the Gate
- 1:29–1:43 Plan Hardware Mount Hinge Direction
Step 2: Mark Mounting Positions
- 1:11–1:29 Mark and Install Bottom Wall Brackets
- 0:24–0:31 Install Lower Wall Mounts (First Side) (this video)
- 0:56–1:10 Install Lower Wall Mounts (Second Side)
Step 3: Install Mounting Hardware
- 11:05–11:15 Drill Pilot Holes and Install Anchors
- 1:16–2:13 Install Gate (Hardware Mounting)
- 1:18–1:38 Install Left Gate Mounts
Step 4: Attach Gate to Hardware
- 5:13–5:39 Install Gate onto Wall Fittings
- 11:15–11:22 Mount and Adjust the Gate
- 5:29–6:07 Install Gate to Staircase
Step 5: Adjust and Test Latch Mechanism
- 0:09–0:15 Test Gate Security and Latch
- 11:15–11:22 Mount and Adjust the Gate
- 0:04–0:07 Test and Fine-Tune the Latch Mechanism
Questions about How to Install a Pet Gate at the Bottom of Stairs
What kind of pet gate is best for the bottom of stairs, especially if it also needs to be safe for children?
For stair applications, always choose a hardware-mounted gate, as pressure-mounted gates are not secure enough and can pose a fall risk. Look for gates that specify they meet ASTM safety standards (like the Regalo or Safety 1st models) if children will also be using them. These gates offer superior stability and security.
What should I do if I can't find a stud exactly where I need to mount the gate hardware?
While mounting into a stud provides the strongest attachment, you can use heavy-duty drywall anchors, such as the E-Z Ancor toggles mentioned, in plaster or drywall. Ensure these anchors are rated for significant pull-out force. Always test the security of the installed hardware vigorously before attaching the gate.
How can I ensure the gate is installed perfectly level, and the latch mechanism works smoothly?
Use a level to accurately mark all your mounting positions before drilling, especially for the top and bottom brackets on both sides. Once the gate is attached, carefully adjust any hinge tension screws and check the alignment of the latch strike plate. A properly installed gate should swing freely and latch securely with minimal effort.
What are the most common mistakes beginners make when installing a pet gate at the bottom of stairs?
A frequent mistake is not ensuring secure mounting by either missing a stud or using inadequate anchors, which can compromise safety. Another common error is not thoroughly testing the latch mechanism and overall stability after installation. Always double-check all connections and confirm the gate can withstand reasonable force.
Do I need any specialized tools for this project, or will basic household tools suffice?
A stud finder (like the DEWALT DW0150) is strongly recommended to locate studs for the most secure mounting, which is crucial for stair gates. While a drill, drill bits, and a screwdriver are common, ensure you have the correct bit sizes for the gate's mounting hardware. These tools help ensure precise and safe installation.
How can I install a gate if I don't want to drill directly into my wooden banister or baseboards?
For banisters, consider using banister mounting kits that secure the gate with straps or clamps without drilling into the wood. If your baseboards interfere, you might need to use wood shims or spacers behind the mounting brackets to ensure the gate hangs plumb and clears any trim. Always verify that such alternative mounting methods remain structurally sound.
How to Install a Pet Gate at the Bottom of Stairs
Outline for installing a pet gate at the bottom of stairs, focusing on secure mounting and ensuring safety for pets and children.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

