Test Gate Operation and Tighten Adjustments
From How to Install a Retractable Baby Gate on Stairs · Step 5 of 6 · Video by Welcome to the Family

Showing 7:06–8:41 of the source video. Watch the full video with every moment.
What happens in this clip
With all mounting brackets installed, insert the gate into its designated position. Test the gate's opening and closing mechanism to ensure it operates smoothly without binding. The user notes that if the gate gets stuck, it's likely due to loose nuts on the mounting hardware. These nuts need to be tightened with a wrench until the gate functions properly. Additionally, the user demonstrates how to remove the entire gate by simply pulling it upwards from the mounting pins, and how to slide it back into place for re-installation.
Goal: Ensure the gate opens and closes smoothly and securely, and perform final adjustments.
What's used
Tools
- Assembled and installed gate Regalo
- Wrench
About the full video
This project provides verbose step-by-step instructions for installing a Regalo Extra Tall Top of Stair Metal Walk-Through Safety Gate (Model #1255 B DS, Black) at the top of a staircase. The process includes assembling the gate, preparing and securing the mounting hardware to the wall, adjusting the gate's width and fit, and performing final checks for smooth and secure operation.
Step 5 of 6: Attach the Gate Mechanism
Once the brackets are securely fastened, align the gate mechanism with the installed brackets. This often involves sliding the gate onto the brackets or clipping it into place. Refer to your specific gate model's manual for the precise method of attachment. Ensure that the gate is seated correctly and locks into place, if applicable. Some gates may have specific orientations for attachment.
Every video in How to Install a Retractable Baby Gate on Stairs
Step 1: Determine Gate Placement
- 2:14–3:30 Mount Gate Assembly Brackets
- 0:39–0:47 Position Gate and Mark Wall Cups
- 0:24–0:31 Install Lower Wall Mounts (First Side)
Step 2: Mark Bracket Positions
- 3:17–4:33 Mark Latching Side Bracket Locations
- 0:30–0:47 Mark Gate Mount Positions
- 3:44–4:19 Secure Mounting Brackets (Side 2)
Step 3: Drill Pilot Holes
- 1:14–1:24 Drill Pilot Holes
- 1:58–2:05 Drill Pilot Holes
- 0:00–0:19 Drill Pilot Holes
Step 4: Mount the Brackets
- 1:56–2:34 Install Mounting Brackets
- 0:19–0:22 Mount Wall Brackets
- 8:16–10:38 Mount the Brackets
Step 5: Attach the Gate Mechanism
- 2:22–2:34 Install Retractable Gate
- 5:13–5:39 Install Gate onto Wall Fittings
- 7:06–8:41 Test Gate Operation and Tighten Adjustments (this video)
Step 6: Test Gate Operation and Lock
- 1:51–1:59 Test Gate Operation
- 3:05–3:19 Test Gate Operation and SecurTech Lock
- 17:06–18:29 Test Gate Functionality and Latch
How to Install a Retractable Baby Gate on Stairs
Install a retractable baby gate at the top or bottom of a staircase to ensure child safety. This typically involves mounting brackets to the wall or banister posts and then attaching the gate mechanism.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

