Mount Wall Brackets
From How to Install a Retractable Baby Gate on Stairs · Step 4 of 6 · Video by Hiatt Hardware

Showing 0:19–0:22 of the source video. Watch the full video with every moment.
What happens in this clip
Align the first wall bracket with the inserted wall plugs. Using your power drill fitted with a screwdriver bit, drive the screws through the bracket's holes and into the wall plugs. Tighten them firmly until the bracket is securely fixed to the wall and does not wobble. Repeat this process for the second wall bracket, ensuring both are mounted solidly and remain aligned with your level line.
Goal: Securely screw both wall brackets into the wall plugs using a power drill.
What's used
Tools
- Power Drill
- Screwdriver Bit
- Wall Brackets (L-shaped)
Materials
- Screws
About the full video
This project provides a clear, step-by-step guide on how to securely mount a floating shelf using L-shaped wall brackets. The process covers accurate measurement, leveling, drilling, inserting wall plugs, mounting the brackets, and finally attaching the shelf for a stable and clean finish.
Step 4 of 6: Mount the Brackets
Align each bracket with its corresponding pilot hole(s). Insert the provided screws through the bracket holes and into the pilot holes. If using drywall anchors, install them first according to their specific instructions, then drive the screws through the bracket and into the anchors. Use a screwdriver or drill with a driver bit to tighten the screws until the bracket is firmly secured to the mounting surface. Ensure there is no wobble or looseness in the mounted brackets. Repeat for all bracket locations.
Every video in How to Install a Retractable Baby Gate on Stairs
Step 1: Determine Gate Placement
- 2:14–3:30 Mount Gate Assembly Brackets
- 0:39–0:47 Position Gate and Mark Wall Cups
- 0:24–0:31 Install Lower Wall Mounts (First Side)
Step 2: Mark Bracket Positions
- 3:17–4:33 Mark Latching Side Bracket Locations
- 0:30–0:47 Mark Gate Mount Positions
- 3:44–4:19 Secure Mounting Brackets (Side 2)
Step 3: Drill Pilot Holes
- 1:14–1:24 Drill Pilot Holes
- 1:58–2:05 Drill Pilot Holes
- 0:00–0:19 Drill Pilot Holes
Step 4: Mount the Brackets
- 1:56–2:34 Install Mounting Brackets
- 0:19–0:22 Mount Wall Brackets (this video)
- 8:16–10:38 Mount the Brackets
Step 5: Attach the Gate Mechanism
- 2:22–2:34 Install Retractable Gate
- 5:13–5:39 Install Gate onto Wall Fittings
- 7:06–8:41 Test Gate Operation and Tighten Adjustments
Step 6: Test Gate Operation and Lock
- 1:51–1:59 Test Gate Operation
- 3:05–3:19 Test Gate Operation and SecurTech Lock
- 17:06–18:29 Test Gate Functionality and Latch
How to Install a Retractable Baby Gate on Stairs
Install a retractable baby gate at the top or bottom of a staircase to ensure child safety. This typically involves mounting brackets to the wall or banister posts and then attaching the gate mechanism.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

