Drill Pilot Holes
From How to Install a Retractable Baby Gate on Stairs · Step 3 of 6 · Video by Elsie Jay

Showing 0:00–0:19 of the source video. Watch the full video with every moment.
What happens in this clip
Once the mounting points are accurately marked, use a drill with a small drill bit (slightly narrower than the screws) to create pilot holes at each marked location. Drilling pilot holes prevents the wood from splitting when the screws are driven in, especially in hardwood or laminate materials, and ensures a clean, secure attachment for the mounting brackets. Remember to wear safety glasses during drilling.
Goal: Prepare mounting surfaces for bracket attachment
What's used
Tools
- Drill Bit Unspecified
- Drill Unspecified
- Hand drill
- Safety Glasses Unspecified
About the full video
This project provides step-by-step instructions for installing a gas strut on a cabinet door. A gas strut assists in opening the door and holds it in an open position, preventing slamming and providing easier access. Although the video primarily demonstrates the successful operation of an already installed gas strut, the instructions outline the necessary planning, measurement, drilling, and attachment steps to achieve this functionality within a DIY context.
Step 3 of 6: Drill Pilot Holes
Select a drill bit that is slightly smaller in diameter than the screws that will be used for mounting the brackets. This prevents the wood from splitting and makes it easier to drive the screws. If mounting into a banister or solid wood, drill directly at the marked spots. If mounting into drywall without a stud, you will likely be using anchors, and the pilot hole size will depend on the anchor's specifications. Ensure the drill is held perpendicular to the surface for a straight hole.
Every video in How to Install a Retractable Baby Gate on Stairs
Step 1: Determine Gate Placement
- 2:14–3:30 Mount Gate Assembly Brackets
- 0:39–0:47 Position Gate and Mark Wall Cups
- 0:24–0:31 Install Lower Wall Mounts (First Side)
Step 2: Mark Bracket Positions
- 3:17–4:33 Mark Latching Side Bracket Locations
- 0:30–0:47 Mark Gate Mount Positions
- 3:44–4:19 Secure Mounting Brackets (Side 2)
Step 3: Drill Pilot Holes
- 1:14–1:24 Drill Pilot Holes
- 1:58–2:05 Drill Pilot Holes
- 0:00–0:19 Drill Pilot Holes (this video)
Step 4: Mount the Brackets
- 1:56–2:34 Install Mounting Brackets
- 0:19–0:22 Mount Wall Brackets
- 8:16–10:38 Mount the Brackets
Step 5: Attach the Gate Mechanism
- 2:22–2:34 Install Retractable Gate
- 5:13–5:39 Install Gate onto Wall Fittings
- 7:06–8:41 Test Gate Operation and Tighten Adjustments
Step 6: Test Gate Operation and Lock
- 1:51–1:59 Test Gate Operation
- 3:05–3:19 Test Gate Operation and SecurTech Lock
- 17:06–18:29 Test Gate Functionality and Latch
How to Install a Retractable Baby Gate on Stairs
Install a retractable baby gate at the top or bottom of a staircase to ensure child safety. This typically involves mounting brackets to the wall or banister posts and then attaching the gate mechanism.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

